Jump to content

yoengkiong

Members
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. yoengkiong

    Mini nvr questions

    I think Xiaomi Ants camera just can see using cellular phone only, you cant connected ants camera to this NVR.
  2. yoengkiong

    Mini nvr questions

    I use 720P for 24 hour schedule record need 20GB, so i think 1 hour record with 720P and quality highest need 830MB.
  3. yoengkiong

    Mini nvr questions

    Hmm, strange. I have the older one, 20150808, I think someone said lately that they had some problems with the newer one, so you can try to downgrade if that helps. Today i downgrade firmware to be 20150808. But the problem still same. Motion detection cant work. After downgrade i choose lan setting manual with protocol i2 and port 34567. Nvr dont get the signal for camera. Using onvif protocol and port 1018 get signal for camera. But that problem still same. Motion detection cant work I so frustated about this nvr.
  4. yoengkiong

    Mini nvr questions

    Just change the Onvif to I12 in settings, change port to 34567 and click save, you should then see the port number 34567 also in the channel list on the left side (last image you have posted). If the port number is not changed there, it's probably some problem in the firmware... You might try to change it directly in the NVR (without using browser). I try to change protocol I12 and input port 34567 signal still lost. I setting directly with nvr without pc. Which firmware u use? Maybe i try to change firmware for compatible.
  5. yoengkiong

    Mini nvr questions

    In the list of channels I see the port number is 1018, even though you have 34567 on the right side, have you saved it? If you did, it looks like some bug in firmware, what exactly is the NVR you have and what firmware version? my NVR firmware V4.0 20151231 i think motion detection can work with protocol i12, but my camera escam brick QD300 only detect in ONVIF, if i change to protocol i12 signal lost. how to change protocol from onvif to i12? thanks
  6. yoengkiong

    Mini nvr questions

    That's strange indeed. You might try to connect the camera via I12 protocol, after Mirko helped me to set it, my camera is now connected through I12 and the motion detection can now be set through NVR and it works. The problem was that I didn't change the port when chaning the protocol (default port is 34567). Try to change the camera protocol to I12 and port to 34567 and see it it will help you. I try to change protocol I12 with port 34567, 23, 80, 554, 843, 1935, 5050, 5051, 8000, 8002 but nothing happened, still signal loss. how to search port for protocol I12? thanks
  7. yoengkiong

    Mini nvr questions

    You probably have set the recording to "Schedule" instead of "Motion". Please check it in the channel parameters->schedule record section of the configuration, or make a screenshot of that section and I'll let you know what to change. I already set to schedule and select the motion. the motion is active after objects come to zone, but no cut off, always record all days. thats the problem
  8. yoengkiong

    Mini nvr questions

    are you using TCP or UDP for communication between camera and nvr? can you provide an access to camera? it's strange if i12 doesnt work... I have tried both TCP and UDP with no success. However I haven't set anything on the camera itself, should it support i12 without setting anything on the camera? I can't provide access to the camera, I have it on my internal network and just testing it, so it's not on all the time. Hi, i try to acces my escam camera with my pc and input ip 192.168.1.136 in IE browser and login as admin in mainstream, after setting zone motion and set to normal sensitivity, i save and logout. and i turn on my NVR and setting IP channel protocol with I12 doesnt work, i select to onvif protocol is work, and the motion is on an record after some objects come to zone, but always work all days no cut of the motion automatically.
  9. yoengkiong

    Mini nvr questions

    I have the same problem and I just wanted to post the same question I have this camera: http://www.aliexpress.com/item/Full-HD-POE-Module-Inside-IP-Camera-Outdoor-Waterproof-1080P-2MP-Bullet-IP-Camera-6mm-Lens/32374876634.html Motion detection works on the camera itself, but on the NVR it doesn't work exactly as yoengkiong explained. I set the zone, save, and when I go back, the zone is gone. I have the firmware 20150808. Is there any chance to get it working? Thanks. i try this motion detection problem on escam nvr k108 if the daylight motion detection is on, just record all, useless motion detection, the icon motion detection is on, even u set sensitivity is very low. but if record in the night with low light, motion detection can't record, the icon motion is off.
  10. yoengkiong

    Mini nvr questions

    hi im a new in this forum, i already bought escam nvr k108, the problem is motion detection fitur. i login to be administrator and i try to set sensitivity high and drag the zone, the problem is if i confirm the save that parameter, i check again, always back the drag zone is gone and the sensitivity is low, i dont know why. so the motion detection cant work anybody can help me about this problem? thanks before warm regard
×