-
Content Count
2,382 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Securame
-
So... If I understand right, you are comparing "DS-76 series" against "DS-7608NI-SE/P"? I am sure you must have noticed that "DS-7608NI-SE/P" begins with "DS-76". So you are comparing a given unit, against a series of many units, including itself?
-
help with my system going online
Securame replied to nicke20's topic in Installation Help and Accessories
I would not call them "advantages", they are just different ways of operating. I prefer to have IP/ports forwarded and access my devices. But EZVIZ and P2P systems are fine for people that do not want/know how to set up their connections. -
Cheap cameras, cheap results. If you did get cameras with no IR-cut, then the colors during the day will be quite bad. If you try the cameras indoors, with no outdoors light from the sun, I am sure that the colors will be way better than that.
-
help with my system going online
Securame replied to nicke20's topic in Installation Help and Accessories
You did not set up DDNS on the NVR. And I do not know for what reason, but Hikvision allows you to configure either EZVIZ, or hik-online. Enabling one disables the other. So if your device came preconfigured for EZVIZ, it did not come with hik-online activated. Hik-online is very easy to use if you know how to do it, but you would have had to manually open the ports on your connection by hand. -
What is the full model of your unit? DS-7200 is just a "family", you have many different models. Older devices from a few years back do not have QR code, and do not have updated firmwares.
-
linking Status Failed on Hikvision NVR Using 8 Port Switch
Securame replied to malford's topic in IP/Megapixel Cameras and Software Solutions
It seems that your blue cable here sucks. If you can not use it wired, there are only a few options that might apply. Disconnect your NVR, connect a netbook using that cable, and see if the network works at all using that computer. -
Correct settings should be with DHCP disabled (that is, unchecked). And use 192.168.1.1 and 8.8.8.8 as DNS servers.
-
Viewing ip cam. while mounting/positioning it
Securame replied to dcam's topic in IP/Megapixel Cameras and Software Solutions
Check this thread: viewtopic.php?f=5&t=43851 -
That is not a PTZ camera, so it will not have RS485. You just point it wherever you want it to look when you mount it, it will not move at all after that.
-
DS-2cd2032F-I IP camera
Securame replied to Excalibur's topic in IP/Megapixel Cameras and Software Solutions
Oh, ok! I still did not open the camera, just noticed that the reset button was missing from the back. -
DS-2cd2032F-I IP camera
Securame replied to Excalibur's topic in IP/Megapixel Cameras and Software Solutions
Oh, and the reset button is gone. -
DS-2cd2032F-I IP camera
Securame replied to Excalibur's topic in IP/Megapixel Cameras and Software Solutions
Here are some pics comparing them both. -
DS-2cd2032F-I IP camera
Securame replied to Excalibur's topic in IP/Megapixel Cameras and Software Solutions
Here are some quick thoughts. The 2CD2032F is different from the 2CD2032. The casing is different, the materials are different. They do look like a lot, but they are not. Just by picking them up you can feel the difference, the old 2CD2032 is way heavier than the new 2CD2032F. They do feel different; the new model casing is different material, it doesn't feel so thick, it doesn't feel so heavy, it doesn't feel so sturdy. It feels a bit "cheaper", I would say. The new 2CD2032F is about 325 grams, while 2CD2032 is about 375gr. The new model does look ok, I am not saying it looks like a cheap camera, I do think that Hikvision tried to lower the costs, and I hope this will not affect the quality. I might like a bit more the old casing, but once they are mounted high somewhere, it will be quite hard to tell the difference between them. This 2CD2032F came with 5.2.5 firmware (sticker says 5.2., english date. According to the serial number it was manufactured 27/Jan/2015. -
help! error 26106 on port forwardig
Securame replied to sadeghg22's topic in Video Transmission/Control Devices
Then you are doing something wrong, those IPs are on the same subnet. Post pictures of what you are entering on the router before you get that error. -
Friends home DVR hacked. Can i find out their IP???
Securame replied to leepage's topic in Computers/Networking
Some DVRs do, some don't. So it depends on what unit your friend has. -
help! error 26106 on port forwardig
Securame replied to sadeghg22's topic in Video Transmission/Control Devices
Your router and the IP you are trying to forward to are on different subnets. What is your router's IP address? What is the IP address you are trying to forward traffic to? -
DS-2cd2032F-I IP camera
Securame replied to Excalibur's topic in IP/Megapixel Cameras and Software Solutions
Already got my 2CD2032F-I. It is a bit different than 2CD2032-I, still have not had the time to test it. -
Post pictures of those cameras. Something tells me that they are not PTZ...
-
One UTP vs two UTP per video balun question.
Securame replied to POOLEYR's topic in General Digital Discussion
10 times better, of course! So using two pairs on the UTP cable must be twice as good! (/joking) -
Siamese RG59 cable extender
Securame replied to byates2's topic in Installation Help and Accessories
I will explain it with my crappy english; a 50 meter cable will always be best than 2 25 meter cables with an adapter. -
auto tracking analog speed dome
Securame replied to rosansju's topic in General Analog CCTV Discussion
Can you? Yes. What do you want to track? And how much are you willing to spend on it? http://www.lmgtfy.com/?q=ptz+auto+tracking+module -
Hikvision S-2CD2332 for budget setup + audio recording?
Securame replied to socalfusions's topic in Security Cameras
The 2CD2332 does not have audio. If you want a model with microphone or audio input, you can try DS-2CD2532F-IS or DS-2CD2732F-IS (they have to be the model with the S on the name). -
Yes, those are baluns and would be suitable.
-
DS-2cd2032F-I IP camera
Securame replied to Excalibur's topic in IP/Megapixel Cameras and Software Solutions
I did get one of this units over a month ago. But it didn't ship until after chinese new year, so I still have not received it. According to the tracking number it was posted 2/March, and left international post office 7/March. I hope it gets here soon. -
Pleased post pics of those baluns, and if possible picture of the camera's end, and the DVRs end.