Gobal

I have now replaced the motherboard and CPU for Intel. i will keep you updated.

Not Sure the motherboard is a K7VT4A Pro

Hi Rory, I am using the card with Windows XP on a AMB Sempron 3000+ with 512MB of Ram and a GEforce FX5200.

The software that came with the card is basic but easy to use for beginners. I would be happy with this software if it would just run without crashing every 30 minutes or so. I have been in contact with Wave-P and in a nut shell they say the card I have, “the Ether8416â€

Thanks Loop, At least I know the make and model now. The zip files have a password on them do you know it ? But I believe this is the same software as I already have, what I am looking for is other software that I could try out which is compatible with this card. Thanks for all you help people

Hi Herminshs, Thanks for your fast reply. The main thing I am looking at is the motion recording, the setting on this software are not very good also the software crashes after about 30 mins I get an error report pop up with the sent report or close thing if I leave the error report up on the screen and just move it to the side the systems keeps recording and movement in the channels is fine, as soon as I touch anything it completely crashes and I need to reboot. I think the software I am using is a little unstable. Can you recommend any software that will work with this card. Many thanks.

Hello all, As you can see I am new to this forum and need some help with this DVR card I have just purchase from ebay, I know now that it was may have been a mistake from reading all the other post on this forum, please go easy on me . http://cgi.ebay.com/Original-CCTV-16CH-DVR-Card-240fps-Surveillance-D228_W0QQitemZ5796498741QQcategoryZ60839QQtcZphotoQQcmdZViewItem The card came with some software just called digital Video Recoding software which looks like an original disk and this works ok but it just not have the functions I am looking for. I am only using 4 of the channels and may up to 8 at a later date. The divers have been installed as DVR Video Capture Device and this is repeated 4 times. I have looked on the card and there is no manufactures name I can find, all I see is 4 chips with the markings Techwell TW6800 and a PLX Technolgy chip I have played around with some of the software out there but it keeps referring to IP address from the cameras and I cant find any IP address from my setting to refer to the cameras. Any help you can give would great. Many thanks