Automated Surveillance

Does anyone know if the new device The Motorola Q on the Verizon Wireless Broadband network supports live video? I tried to install the PDA application PDA Viewer for Win CE. That did not work. The Motorola Q uses the Windows mobile 5 OS. Could this be the issue? If you have any suggestions as for the best PDA Device on a wireless broadband network so that I can watch my Geovision system I am open to suggestions. I want moving video. Any help from any of you geniuses would be greatly appreciated. Thanks in Advance

[Yes it's all set up correctly. The error message I get when trying to install the G-View App on the Motorola Q is: "Installation of GView_e_7100.cab was unsuccessful. The Installation file is not intended for this deviceâ€

Hello everyone and thank you in advance for any help or suggestions. I have built a system consisting of: Processor - Pentium 4 630 3.00GHz HT Em64T, 800MHz FSB Motherboard - ASUS, P5GL- MX Intel 915GL chipset, 800MHz FSB PCI-e x16, SATA RAID, Video, Audio, LAN Memory - Crucial, 512MB PC 3200DDR x 2 Video Card - Sapphire, ATI RADEON x550 PCI-E 256MB DDR Hard Drive - Western Digital, 250GB WD Caviar SATA II 300MB/s DVR Card - Geovision 1240 -16 When using the interface camera video is not shown if DSP is selected. When using the Full screen DSP only black pictures appear where video should be. Any help getting DSP to work with this system would be greatly appreciated P.S. I tried switching out video card to a Xtasy ATI x300se 256MB PCI-e card and system did not even recongnized the video card.

I am looking for the ultimate in quality. Let me know what you all think would be the perfect system specs for the new geovision combo cards. Should this be a new thread? Mo

I have not tried an external analog monitor since I cant get monitor 1 working. I've still be doing research and still have not come up with a solution. I reformated the HD, Reinstalled Windows, Installed your Geoversion Scott, and again downloaded the lastes drivers from ATI.com STILL NO DSP OVERLAY. And I though with system specs this high I would have great, quality DVR system. Instead only headaches. Check my first post for the complete system specs. Mo

net framework 1.1 is installed. all windows updates are installed are there settings in the catalyst control center that need to be changed?

Yes I did disable hypertreading. Unfortunaly this did not solve the problem

Hi Scott, I am using version 7.0.4 - upgraded from geovision.com.tw. Originally installed 7.0.2. I upgraded because when DSP is checked I lose the video. It does not say video Lost, simply a black screen. When I don't use DSP I get a picture but it is quite pixelated. Do you have access to 7.1 yet? Im stuck on what to do with this system probly just sell it. I wanted to used PCI-e to see what kind of improvement in video quality I would get from AGP baised Geovision systems. If you don't mind sharing with me. What do you suggest for the combo card series as far as system specs go. Thanks for the help Mo

Resolution is set at 1024x768 I have downloaded the latest catalyst driver for the x550 chipset from ATI.com Testing with 1 Box style 24volt 480TVL with 6mm-15mm Auto Iris Varifocal lens.

Gentleman, I need to suspend 24 cameras (2 PTZ) from a 20ft. high ceiling. The warehouse ceiling is the exact same style ceiling as the Home Depot stores. I would like to suspend the cameras 10-15 from the ground depending on the Area to be covered. I would prefer something that claps to the beams. Yes, I asked the People at home depot how those were mounted and if I could buy the hardware there. It was the same experience as talking to an associate at CompUSA, or a Radio Shack employee, or staring into a fish tank. They all know nothing. Any help is greatly appreciated. Mo

Amazing!!