CHOPRAMO

We have installed a DS-KH8350 WTE1 indoor monitor with 2 no.'s DS-KV6113-WPE1.Everything works well except that even when a call from the door station is picked up on the indoor monitor, the HIK-connect app on all mobile devices still keeps on ringing. We have updated the firmware of the indoor monitor as well as updated the HIK-connect app. However the problem still persists.Any help will be hugely appreciated

We have a few Hikvision DVRs (7200 series) installed. Recently all of them have stopped booting up. Has anyone else faced this issue? Does anyone have a solution?

hI, Have you tried disconnecting the ethernet cable and connecting the camera and router via WPS?

First - you said you are able to view the cameras on your pc and phone. Does that mean you are able to view them remotely? If yes, there is No Problem. However if you aren't able to view them remotely then you need to do ONE of two things 1. Forward "device port" - 8000 (by default) and "http port" - 80 (by default) to the IP address of the DVR OR 2. Activate HIKCONNECT in the DVR menu and connect through that.

Have you tried connecting a VGA screen to the dvr and accessing its menu?

Have you tried doing a factory reset and starting from scratch?

Need some help. I have come across a Samsung DVR HRD-E430LP. I don't know how to get the CMS software for the same. 1. Can anyone provide a link to the CMS software? 2. Does anyone know the default user ID and password for the DVR? 3. Does anyone know how to reset the DVR if the password is not known? 4. Is there a software for Mac OS to view the DVR? I shall be extremely grateful if anyone can help.

We have 3 no.'s Hikvision NVRs 7616 NI E1 installed. Each has 16 no.'s DS2CD 2110 Fi cameras attached. We have observed that one of the NVRs randomly freezes. The cameras are connected to a gigabit switch. The frame rate is 15 and the bit rate is 1280 kbps. The problem is not related to any one NVR. Any one of the three randomly freezes and had to be switched off and on. Has anyone else faced and solved this issue. The firmware version is V3.4.92 build 170228 and the encoding version is V5.0 build 330228

The firmware is the latest

I am referring to the cameras interface.

When you go into the configuration, in storage there is an option to select the timing of post record. That should allow the camera to record for longer in case of an event

You can look at Hikvision ip cameras. The software ivms 4200 is free and can be installed on a PC. You can get push notifications on your phone via the Hikvision mobile app ivms4500 (free).

What is TFTP? How is it done? Where can I get the firmware from?

Can anyone help me out on this one? i need to embed live stream from a Hikvision DVR (it supports RTSP) in a HTML web page. I just need to embed channel 1 from the DVR. Could anyone help me out with the HTML code to achieve this.

Can someone send me the mobile viewing software for Hikvision 7208/7216 which can work on Nokia E71/Nokia N series/Blackberry? Can someone also tell me there experience of using iVMS-4500 on an iPhone. i. Does it work without a problem? ii. Does it work with Dynamic IP addresses? iii. Can one hear the audio too?

There is not much to push and check. Any suggestions on where to start looking. Has no one faced such a problem!!!!

I recently dropped a PTZ camera from a height of 10 feet. It is a Hikvision outdoor analog PTZ. On installation it worked fine for a couple of days. However, now it only zooms occasionally. The panning works just fine. When the PTZ is switched on the lens zooms. However, after that the zoom works intermittently. Is there a connection that I can check on the module or something else that I can do?

Well we have checked the RS485 cable, switched the PTZ on and off many times. Removed the 9 pin cable and re-fixed it twice. What else can I do???? As for Mr. Shankarsha's comment, would you kindly elaborate.

I am using a Hikvision 7304 HI-S at site. It supports HTTP, RTSP. I need help in embedding channel 1 from the DVR in a web page which can be accessed by anyone from any web browser. I have no experience in HTML coding. Could someone help me out.

I have a Hikvision DVR (h.264) which supports RTSP. I can view it on VLC. Does anyone have experience of viewing the RTSP stream on QuickTime? I will truly appreciate any help.

Thank you for the suggestion. Could you also help with the process of embedding the live feed in a web page

Thank you for the prompt reply. I have 2 questions i. How will someone using IE view the live feed? ii. What if the DVR does not support RTSP? Isn't their a simple sample HTML code that you could provide? I shall be grateful for a reply as I do not know how to do this.

I am facing a problem with a 16 channel Hikvision DVR 7316. Not more than 2 people can view the DVR on the net simultaneously. Whenever a third person tries to log in, he gets an error message. Is there a solution to this problem??

Thank you for your help VirtaNi. I will try it at my site and see if it solves my problem.

Thank you VirtaNi. Could you tell me how to install " Stream Media Server".