Hello everyone!
I try to view my dvr through internet via ddns.
My network setup is like this:
1. ISP to NanoBridge M5 which has static IP 192.168.1.1 and does the PPPoE
2. Nanobridge to TP-link WR741ND (WAN connection type set to Dynamic IP mode) which gets 192.168.1.100 as WAN IP and 192.168.0.1 LAN IP.
3. The router connects to a 24 port switch (TP-link)
4. The DVR connects to the switch and is set for ddns.
Now if I enable the DDNS option on the router , forward ports for DVR and try to access my dvr through the internet i get to the setup preferences of Nanobridge.
The same happens if I enable DDNS on the Nanobridge with ports forwarded for the DVR (for 192.168.0.200).
My previous setup was like this :
1. ISP to Nanobridge working as bridge
2. Nanobridge to router and PPPoE was done there(to the router)
3.router to switch
4.switch to DVR.
With this setup I could access DVR through internet but I had too many ineternet disconnections so I had to change the Wan connection type to Dynamic Ip.
For better understanding I have attached an illustration of the network.
Please give me some advice on how to solve this problem (I have been working on this 3 days now with no success).
Thank you in advance!