harry2k09

Hi all, does anyone know if it's possible to use a Windows Phone7 to view live video from your DVR? Where can i download an application if it's possible? Best regards, Harry

Hi there i have a NV 6480 Express PC based and two EH1004H Nano embedded systems. When using the realtime remote playback functionon on the EH systems i'm not able to view video in the fast forward (2x and more) mode. The video just plays at the same speed (close to 1x) . When using same internet connection and the NV System everthing works as it should. Has anyone experienced this problem as well? What can i do to enable faster playback (frames can be skipped) in the remote viewing of the EH systems? Best regards, harry

ok, handyviewer is not functioning on the embedded system EH1004 Nano. Is there any other possibility to grad single images from this device?

Thanks tom, the java viewer is not working for me, since it displays only a link to a .jar file that cannot be easily run. However, the handyviewer does the job (at least for my NV system). By connecting to "your-ip.com:5550/mobile/channelXX.jpg" a snapshot image is generated and can be integrated into other websites... Hope this also works for my EH1004 System, but can only try tomorrow. Thanks for your help! Harry

Hey, anyone succeeded in getting this working? i.e. is there a solution to grab camera images through java or any other web application and save them as .jpg ? I would like to set up a webpage featuring single images from an aver dvr and update it from time to time (simple webcam). Any help would be appreciated. Thanks, harry

Ohh, i forgot to mention. It's a NV 6240 express. Hope that helps

I'm running a NV6240E on this specific mainboard, and it works like a charm

I was wondering if it is possible to use an IP-Cam together with an analog audio input on a NV6240 Card. The IP Cam's built in audio is not supported by the current software release, so i want to connect an external microphone on the same channel as the IP Cam. Has anyone tried this yet? Thanks in advance for any help!

Thanks guys for the answer. Currently i'm not able to check that because i have only remote access to the dvr. In the 7.7 software the audio feature (in recording setup) is grayed out when setting this channel to IP-Cam. How can one setup and configure audio recording in this configuration? Thanks again!

Hey guys, got a problem with TV-Output on my NV6240E DVR card. I yust cannot see anything on the TV. Tv-out activated in DVR Software (most recent version), Tv and cable checked. Measuring output voltage on cards tv-out i get something around 1.8 V Could someone please help me? This feature is really needed! Best regards, Harry

no, of course tv-out is connected to RCA-in of my TV and not to RF-in. I just see a noise pattern on TV , but when changing configuration in avermedia's dvr system setup i can see at least a change of this well-known noise pattern on Tv. Any other suggestions?

Ok, after sending back the card to my local dealer (Romania), he told me that everything is working fine! As he said, TV-out was checked and no problems could be detected. Now, after plugging back the card into my computer, tv-out doesn't work Has anyone had similar problems with this card???? Maybe there is a conflict with other hardware in my system, but avermedia DVR works like a charm (exept for Tv-out of course). Any help is appreciated

thanks for the reply. of course i'm trying to display only analog cameras on tv-out. As i said, there is a signal coming (~1.8V) but the TV cannot display (tried different TVs)...