SAJEEL
Members-
Content Count
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by SAJEEL
-
Hi there, Need some help again, i have a pelco 5100 dvr setup need to have remote viewing on pc and (mobile as well if possible). The customer seems to think it can be done on mobile although i am not so sure. From what i have gathered there is 2 connection methods, secure using a vpn connection which is endura network, and un secure the stand alone method. I have the wan ip, ip of dvr and remote key for software, i also have putty to ssh but cannot connect. I believe the software uses port 27235 but am not 100% on this, dont have any idea of port used for SSH I want to connect using remote client and normally i open the relevant ports on router and forward to dvr, install remote client and done. However on this dvr there is no where to choose port numbers, i will be using a dns resolver as they have dyanmic wan ip address. I am sure someone on here has setup these before and is able to help, thanks in advance.
-
Hi, have pelco dx8100 setup on static ip with remote client working fine on pc, has anyone been able to connect to a mobile client and what software have they used ? Thanks in advance
-
RJ50 is the one looking for. This is serial connection for power and ptz controls.
-
Hi, Am looking to purchase 10 Pin RJ45 connector in the uk to wire up pelco ip cctv, but can only find one supplier; http://itm-components.co.uk/products/plug-rj4510x10rnd-cbl-100pk?utm_medium=cpc&utm_source=googlepla&gclid=CLvF1Yflg80CFbYV0wod7eYFHg Please let me know where you get yours from along with tool to crimp these ? Many thanks in advance.
-
the best option would be a mains power network adaptor, however this will not work if the socket ring is on different circuits, the other way is to use wireless-n ethernet bridge however there will a loss if you are too far from router, you did not mention distance from router as this will help offer solutions.
-
Hi, Anyone had any success on linking ip cameras to tv apart from using a pc or laptop connected to tv ? Any suggestions or ideas would be much appreciated
-
Thanks, do i download viewer app from play store ?
-
Thanks for replies, i decided to use a 16ch dvr as cost of 16ch multiplexer is almost the same, so i will remove 8ch dvr and 16ch then split outputs.
-
I have 3 dvr's 1= 8ch, 2=4ch 3=4ch They need to view all 16 cameras over 2 monitors and add a additional 2 monitor / tv to 1st floor. My solution is a muliplexer on dvr 1 and 2 output and feed 2 monitors by splitting output. Then take one more wire on dvr 3 to first floor and feed the other monitor. This way they have identical view upstairs / downstairs. I can use split screen or sequence to view 12 cameras. Any suggestions or better way to do this are welcomed ? Thanks in advance.
-
You need to know what port the application is using and then open that open that open on your router. this site will help you http://portforward.com/default.htm Then sign up for a dyndns account here http://www.noip.com/ you will install the client on pc on same network as dvr. If the dvr supports dyndns then you can enter details into dvr. Once all is done switch wifi off on mobile and test. An example of you address is http://homedvr.noip.com:1824 If your still stuck message me
-
yeh all set its been a long time since i spoke to you, keeping busy out there with cctv work ?
-
Hi, I am going crazy trying to solve this, issue, i can connect to dvr using dyndns and open port 5000 on router, in firefox using quicktime i can conect and view cctv on dvr, however on ie8 i can connect to dvr, but cannot see any video using h.264, i can see settings and make changes, however the local machine on lan can view and chage settings, the only difference i have noticed is that in c:\windows\downloaded\program files there is amctrl and dvi plugins which are from dvr source, how can install these remotely, without having to take my computer there or bring dvr to remote computer.
-
Hi Tom Good to see you still on the forum
-
sound like there is a lag in your broadband connection you can perform speedtest, http://speedtest.net/ make sure pc is in idle mode, no downloads or uploads. If you can connect to dvr but timesout then you have problem with connection, revert back to old isp or choose another isp, by the way what isp are you currently with.
-
How to convert .h264 file format from DVR
SAJEEL replied to phyberoptix's topic in Digital Video Recorders
if you post model and make of dvr i will try to help, in the settings of dvy most have different settings as well as h.264. -
There are two way to view remotely: 1) using static wan ip address i.e. 84.123.456.789:80 the :80 being the port number, if you do not have static ip after a while you ip address will change, see www.mywanip.com 2) using a dns resolver service such as http://www.no-ip.com/ and http://www.dyndns.com/ which instead of ip gives you an address such as honeywell-dyndns.office.org:80 downside being you will have to have install update utility on dvy or local pc where dvr is located. hope that helps post back and let us know so that others can benefit from the information
-
thanks for sharing the info, some interesting facts there.
-
Hi, sound like you wan ip address has changed, easy solution on lan pc type www.mywanip.com make a note of ip for example: 80.123.456.789 and then try to acess using port numer like this 80.123.456.789:80 or 80.123.456.789:5000 i normally use ports above 5000 to avoid problems, if that works then you have two options one is to pay isp for static ip address or use no-ip or dyndns both are free after registration and can be found by google. let me know if you resolved or still stuck.
-
Hi, I need a good quality microphone for a client, he currently has 12v condeser mic which is powered 12vdc, the sound can be heard however there is whistle / echo background noise, require a good quality mic, dont mind if i have to fit pre amp. Thanks in advance.
-
could be however my machine at home had java and latest update.