Stevebayb

Thanks for that.......it looks like there might be some light a the end of the tunnel..now i have to try to deleate my number....

yes that would be good,got to ask do you have a call out charge and hourly rate etc....my number is 01634

Hello. Im in Chatham ,Kent..Me4 next to the burnt out buildings.

Thank you for your reply but i have been looking at that for about 3 months now....i have totaly given up......all i want to do is control it,any way any how, either with a twisted pair rs485 up the coax or even with software over the net..its all plumbed into my dvr card which i can see over the internet and really easy to get to as the drx100/power supply is indoors.......i have now got to the stage where i just want someone to look at it and say "oh here is the problem)i soo need this up and running as i said in a previous post i have a mad man near by who just loves lighting fires...he sets light to the building next door to me quite frequently and just want to come home to a house and not flames and ash....the camera is running at the moment but it has presets in it so it just goes through the motions all day long.....steve

Hello, this just does not seem to be working for me so it looks like i will have to hire a cctv man to fix it..does anybody no a cctv man in the medway towns that might just be able to help me control my ptz dennard 2050 dome..many thanks steve

Hello. I was wondering if any body knows what protocol works with a dennard 2050 with a drx100..I amtrying to control the dome with software called ptz cntroller,but on the drop down list it does not state anything for dennard,t does have pelco d etc.i have set the baud rate to 9600 and tried all protocolsbut im not being able to control it....The other question is that i have used the serial port on the pc and connected pins 3 and 5 ,do these two cables become a twisted pair and go to the tp connectins in the drx100 ...Thank you Steve

Thank you very much for your responce and time in doing it, I will give it a go asap. Steve

Hello. On a previous post i asked if someone would be able to help me set up my dome using a vcl controller.....as i didnt get a reply now i have decided to try to control the dome via my dvr card in my pc........would someone tell me what i will need to do this.....as in the cable/adaptor that plugs into the pc which goes to the dome,a good recormended ptz software program and if known what terminals to connect....I really need to get this dome running as i have an arsonist at the back of me and i want to come home to a house and not a pile of ash...........this is my previous post ....many thanks Steve..... Hello,I was wondering if anybody would be able to help me...I have set up a cctv system with a Dennard 2050 ptz dome,dvr card in my pc and a baxall up the coax controller.....every thing was fine and working perfectly for a couple of months but the baxall controller has stoped working...I have a VCL MAX0124-00 telematry controller which has a rj45 connection on the back and also a seperate power supply... My question is one end of the cable goes into the vcl but i do not no the cable colours / numbers to make into a twisted pair that goes to the dennaed dome........ I think this is correct but im no cctv expert........I only want to control the camera from home and do not want to control it over the internet.....Please Help Somebody....Thanks for reading this..Steve

Hello,I was wondering if anybody would be able to help me...I have set up a cctv system with a Dennard 2050 ptz dome,dvr card in my pc and a baxall up the coax controller.....every thing was fine and working perfectly for a couple of months but the baxall controller has stoped working...I have a VCL MAX0124-00 telematry controller which has a rj45 connection on the back and also a seperate power supply... My question is one end of the cable goes into the vcl but i do not no the cable colours / numbers to make into a twisted pair that goes to the dennaed dome........ I think this is correct but im no cctv expert........I only want to control the camera from home and do not want to control it over the internet.....Please Help Somebody....Thanks for reading this..Steve

Thank again Im in Chatham Kent

Thankyou for your help.Sorry buy i dont no what a dvr or ptz is.I will use the vcl but i dont no what it connects to. Sorry for being a bit thick and thanks again for trying to help.. Just realized its digital video recorder.just using a sanyo 96 hour recorder. Dont think its digital but at a later date i want to record straight onto a pc hard drive.

Thankyou for your help.Sorry buy i dont no what a dvr or ptz is.I will use the vcl but i dont no what it connects to. Sorry for being a bit thick and thanks again for trying to help..

Hello. Would any body be able to give me an idea how to control my dome camera.Its a Dennard 2050wp. I have mounted in on a wall with the DRX100 power supply and when i power it up after about 30 seconds it does a lap of honour and sets itself to the position i think it was last programed too.I have a VCL controller/telementry board with a what looks like a ethernet cable connection,and an old baxall very dated version with just push buttons...I have looked on the net for information about controlling it but to no avail. One other thing is that i have read up about the blue and yellow switches should be set to 0 and 1 but i can not see a 0 or 1 inside the case and my eyesight is very good.