DannyStyle22

Has anyone experienced extreme latency issues when using DS Control Point or Digital Sentry with Panasonic cameras? We use DS Control Point as our viewer software which is working perfectly. We have found the only way to get rid of the latency issues on the Panasonic cameras is to raise the FPS in DSAdmin up to 20-30FPS. The downfall is when raising the FPS that high it eats A LOT of memory. Our current setup is: 3 x Pelco DSNVR321500 57 x Panasonic IP Cameras (The ones in question are the Panasonic WV-NW964) 3 x JVC IP cameras (Which have no latency issues) 2 x gig switches over a dedicated network 1 x KBD300A Pelco joystick for PTZ cameras Please let me know if you need additonal information. Thanks.

hardwired - Thank you for your response. To answer your questions 1. How do you know that you don't have that latency in the JVC cameras, if they are fixed and not PTZ? They are all PTZ's. The JVC cameras have zero latency when moving the cameras via the joystick where the Panasonics have 1-2 seconds of latency. 2. What type of compression are you using, MPEG4 or MJPEG? All the cameras are MPEG4. I've tried changing them over to MJPEG for testing purposes, but either the panasonics or dsadmin doesn't communicate properly because I loose video. 3. I've tried using the web browser software and it has the same latency issues. I've also hooked up directly to the camera and it still has the same issue. 4. Also, I'd give Pelco's tech support a call about it, see if they have seen anything similar. - I've spoke to them and to be honest they aren't very helpful. What I've found that works is if I go into Panasonics viewer software and change the max bit rate up to unlimited it removes all the latency issues for about 10 seconds, then defaults back to the original settings. I'm assuming there is something in DSAdmin (DS Control Point) that makes the camera default back to the original settings, but I can't figure out what it is.

Bueller... Bueller... How about putting it this way, can anyone explain to me how you increase the max bit rate on an IP camera while keeping the recording FPS low?

Hi all, Can anyone recommend a good IR illuminator or something similar to increase night time visibility when using a Panasonic WV - NW964? We currently have about 13 of these cameras on the exterior of our facility and we need something to increase visibility at night. Thank you for any help!