willo

thanks guy for all your answer totally overwehlmed by the amount of answers i recieved one vcl camera destined for bin

thats for reply begining to give up hope,im in liverpool uk can you shed any light on the coax/r485/422 as on the honeywell site it states that it can use either but tried with both 422 and 485 but dont seem to get any joy tried all the bauds 2400/9600 but with no movement?if i can trackdown a controller will this work with the coax or twisted pairs from data + data -as you can see not to cued up on cctv thanks again john

i have obviously been mis informed about this being the best site for cctv help seems such a shame to lash it in the bin

anyone ???????????????????????

hi can anyone shed some light on how to set up this camera tried just about everything tools at my disposal are r323 to r422 convertor r323 to rs485 convertor pc based cam controller and software supporting pelco p+d,tried honeywell site but a bit confusing as one set of docs tells you to use 422 and one tells you to use 485 inside of camera connections are +vh/ovh video/vid.gnd +vs/ovs data+/data- sync/s.gnd.can get picture on screen fan and heater connected and working and it goes through set up dance ,no info appears on screen just pic, the boards inside of camera have vc472v3 which has the pinouts on it 1-8 and 1-4 the board below has vc471v3 this has lk1 with jumper on but only two pins which it bridges both this is next to small battery on top board i.e 472v3 there are six pins with a double jumper on one side reads tp term and the otherside reads on /off and this is also labelled lk1 the double jumper is set to on .on honeywell website it shows all connection methods but none appear to match up with mine as they seem to have an nvt connection on there and mine does not also it mentions coax or 485 telemetry and that it auto sensors which one is connected??? when i recieved dome it had all wires conected into it apart from data+/data- sync/s.gnd so i assume it was run originally thru coax but the person i bought it of is as clueless as me as regards to any other equipement that may have been with camera as he was just told to take camera down from its position as building was being demolished.am i missing some kind of convertor as when i try to control camera using 485-422 it will not do anything thanks in advance for any help as i m not to cued up on protocols and such so please keep ans as untechnical as poss please thanks john

hi just purchase camera of ebay but cant find any info as to who its made by,can get camera to show on screen and goes through its ptz mode then stops trying to run from computer with dvr software , cables coming in to camera are as shown in pics cant work out how to use ptz as all the info i can find relates to rs485 or rs422 i have a rs422 serial adapator but cant find were to wire this to as all i can see on cables is r+and r- but no t+ or t- and as reguards protocol when camer shows on screen it says protocol 03/015 depending where dip switchs are positioned please help as at the minute all ive got is a rather expensive static camera sorry pic to big to send conections for wires on camera are gnd/ ac24/ r- /r+ /v- /v+ 6wire input then 8 wire input consisting of alm 1/ alm2/ alm3/ alm4 /gnd/ comm /nc /no dipswitches 1/10 then another set 1/6 dp switches on 1+2 on both sets rest are off also has jumper behind cable wire which reads jp3 123 jp:1-2 120r pins 1+2 have jumper joining them thanks john