zmark

Yes, the repair all info. box was checked. Not sure which INI file to look at. As a test I connected a camera to record some video to see if it was stored in the proper drive and folder. The video was stored on the correct drive and in the correct folder. The new recordings can be viewed but the old can't. The customer needs to be able to view as far back as a year. Any ideas are welcome.

The video is on the storage drive and the path is also correct. Earlier this year I replaced the card in a system older than this one and the view log on it worked as it should with Geo software V8. To double check the problem system I installed an old card with V7 software and after a data base repair the view log worked. The customer wants to upgrade all their dvrs with the new cards so they will all be the same but I need to try and find a solution if possible. Thanks for the suggestions.

Replaced a failed GV 600 card with a new GV 600 card and the V 8.31 software that came with it. Performed a database repair and opened the view log to make sure the previous recordings could be viewed. When selecting a time I only get a blue screen and a ? as if the file can't be found. The old video was saved in MPEG4 format. Could this be the issue and if so is there a solution?