Angel1403

Hi there, I just got a new high res bullet camera with 16mm lens. It was great. However, a little to close to subject. I unscewed the 16mm lens and added 12mm lens. However, I cant get a clear image??? It looks like I would need to screw the lens in further than it will go to get a clear image??? Is there a special way to add a new lens so that focus is good/clear? Cheers Allan

Hi Scott, Thanks for that. The pc is not on the net as yet. Though, it will be on Broadband soon I will download VPN in preperation. I will let you know when it is in place. Cheers Allan

Hey everyone, I bit the bullet and got a new pc put together Everything now seems to work fine. Thanks for all the help. However, I have a few questions.....I hope not too stupid 1) In the configure menu screen the video attributes option is shaded i.e. I cant access it??? 2) What does the hybrid card do. I know it has 4 audio ports...but what else can I do with it? 2)How do I playback footage on a TV connected to the DSP card? Does anyone know where I can purchase a small bodied high res colour IR outside camera for less than £150? In relation to the new PC I have a strange problem....I put in a 200gb hd as the video footage drive. However, Win XP Pro SP2 can only see 32gb ???? Anyone can ides about that. Thanks again for all your help. This is a great board. Cheers Allan.

Hi Scott, Doing a clean Win XP Pro install at the moment. The system would not boot up, so I gave up........Though, very nearly put computer out the window I will leave out the Hybrid card at the moment. If it works without it, I will try adding it. I think the camera issue was caused due to me connecting the video cable to the white audio in cable on the GV Card Am I correct in thinking that the audio lead goes into the hybrid card, or into the white lead with the same number as the video input chosen? Cheers Allan

I dont know what I line lock camera is. I have 3 B&W Infra red cameras and 2 Sony ccd infra red colour cameras. Cheers Allan

Ok............I have removed the Hybrid MVP2 card and the system does not hang I have got into the main screen. Although, no image as yet from the two cameras I have connected?? In relation to the Hybrid card.....does this mean its faulty? Cheers Allan

Yea, Its only the Geovision that locks up. Only other software is MS Office 2003 and Photoshop CS. Cheers Allan

Hi Guys, Yea very little other stuff on the system. I will delete all thats not needed. I will update following. Cheers Allan

I forgot to say I use Norton Anti Viris and Windows XP SP2 Firewall. Cheers Allan

Hi Jasper, I deleted the 7.04 software and re installed it. The same problem. I then deleted the 7.04 software and loaded the 7.02 software. The same problem Now I am really frustrated. I am almost at the stage of taken the cards out and puting them into a different pc. Though, I dont want to do that unless I must, as the other pc is too high of spect just to use for cctv. Cheers Allan

Hi Guys, I could not get a ATI 9600 I got an ATI X700 with 250mb ram However, the same problem, it freezes at the multi cam set up screen. My motherboard number is Intel D850GB Thanks for any help. Allan.

Hi Scott, Thanks............. I will see if I can find the model number of the m board later today. Its 01.30am in Scotland..........So I am off to bed. Thanks for your help. Cheers Allan.

Hi Scott, Thanks for getting back to me. I will change the video card and see if that does the trick. If no joy, I will also change the m board. Cheers Allan

Thanks for the replys. Its a Intel P4 Motherboard and a GForce 2 with 32mb video card. Could it be that the GForce 2 cant cope? Cheers Allan

Hi, I have just installed the above card, dsp card and hybrid card in a Pentium 4 1.5gh pc with 760 ram. Its running Win XP Pro SP2. I am using Geo software ver 7.4 The cards seem to be installed ok. However, when I start the Geovision sofware the system freezes when the Geo software says " Multicam Setup Initializing" The only thing I can do is push the power button to shut down the system. Any ideas. Is this due to my PC being below the min spec of 2gh? Thanks for any help. Cheers Allan