jelly belly

A major CCTV manufacturer has an immediate vacancy for a bench CCTV repair engineer based in Fareham, Hampshire. UK. Duties would include: Diagnosis, testing and repair of the Vicon range of CCTV equipment which includes Cameras, PTZ controls, Monitors, Matrix switchers, Digital recorders and an ever increasing range of IP components. Repairs are to component/PCB level as appropriate. PC type products are now a significant part of our product range. The ideal candidate would have a recognised electronics qualification. If you are interested in the position or require any further information please send an e-mail and your current CV to timmartin@vicon.co.uk - http://www.vicon-cctv.com No Agencies, Thank you.

A Dome camera will suit most situations and they come with an integral camera/lens and receiver. Newer models (Vicon) have a 35x zoom capabilty. If however you need to have a greater zoom than that you will probably need to go for a conventional pan/tilt head and select a camera lens combination to suit. A lens calculator will help you decide what size lens you need. You can download one by visiting my site below. Jelly Belly

2 x CCTV Support Engineers are required by a major CCTV manufacturer operating in the U.K. 1 based in our Northern office (Manchester area) and 1 based at our Head Office in Hampshire. Duties will include supporting our customers across the UK, Europe and Middle East via Telephone, e-mail and occasional site visit. If you are interested, please PM or e-mail a few brief details about yourself to job@software4cctv.co.uk and I will forward them on to my employer. Please Note that I will be unable to reply personally to e-mails and will merely pass them on. The company concerned will contact you directly should any further information be required.

Richard Vicon in the UK have a new Budget-end range of DVRs that come in 4, 8 & 16 way versions. They are available through Norbain & Gardiners.

Vicon have a new addition to their Kollector range that has a built in 16 x 4 switcher. This can be controlled remotely via the ViconNet software and allow you to switch Video input signals to composite monitors. Ask about ViconNet Version 3 http://www.vicon-cctv.com

Hi Jasper What you mean you don't mount all your cameras at eyelevel ???? No seriously though, Thanks for the feedback and I will take a look at that. As you say, I think it will be a challenge! Have you found the Calculator useful so far??

Received this e-mail today. Luckily we don't have this sort of trouble in the U.K. Take a look!!! http://homepage.ntlworld.com/n.buckingham1/Temp/Computer%20Problems.pdf

The software has been tested OK on XP & 2000. May be you need to be logged in with admin rights to install? Let me know if you have trouble installing. Jelly Belly http://www.software4cctv.co.uk

Thanks for the reply on this one. I've eventually sourced a Behringer ADA8000 which seems to fit the bill! It has 8 input channels with phantom power for balanced condenser mics and 8 line level ouputs for the DVR. It is normally used as a A/D converter for Digital Audio recorders but apparently by linking the Digital output to the Digital input it can be used as a analogue preamp. See the spec below:- http://www.behringer.com/ADA8000/index.cfm?lang=ENG

Does anybody know of a 4 or 8 channel Microphone pre-amp with Phantom power that will give a line level output for a DVR. It needs to have 4/8 channels out as well. All the models I've sourced in the UK so far are out of stock. Any leads would be gratefully accepted. Thanks

Why not check my Graphic CCTV Lens Calculator software. [edited for link back]