teame6

Hello, Having the problem that on our 2ndhand D2SA DX09C DTVU the old harddisk crashed. switching on with the old hardisk lead always to: *** Software build is incompatible *** I could make a imagecopy of the disk, but there were already 3 files in the fat32, which a filesystemcheck renamed to xxx.chk. Then I stared with a new hdd, entering bootloader with up towngirl all seems ok, setting of IP worked ... I copied with ftp the new version on the harddisk (after format c: Y), everything seems OK, but after restart I always get the same *** Software build is incompatible *** I used two diff. harddisk, the same, I even found the very old firmware on the clone copy, (diskdone.zip) renamed it to disk.zip and installed it, same result. partition was made with type c using linux, formatted with the bootloader After putting via ftp the disk shows: ------------------------------------- C:\>dir TEST . 20 07-Jan-110 16:52 test BIN . 0 DISK .ZIP 20680748 07-Jan-110 17:13 DISK.ZIP 2 file(s) 20,680,768 bytes 1 dir(s) 80,018,702,336 bytes free installing seems to be ok, (extracting all files ...) I`ve even used another ide-cable as well, no change The funny thing is, that after installing - no matter wheter old or newer firmware, there seems no way to enter via RS232. my prompt is *> and any keypress leads to "Not logged in" trying at prompt with LOGIN --------------------------- *>LOGIN thekhyber Invalid login *>login towngirl Invalid login What i did not understand: on the old harddisk is a directory NVDATA with DSKMII.TXT (8 KB) and a subdir BB_RAM0 with SERS00 (1KB), sysdata (empty) USAG00 (1 KB) Does anybody know, if the NVDATA has to be on a new installed harddisk and if yes, the mentioned files are all ok or if there is something missing? SYSTEM PARAMS: --------------- Version for BOOTLOADER is 3.1_(006)(DVTU) C:\>NVMDIR BB_RAM0 PRCNVM: Device information for BB_RAM0 PRCNVM: Total device size = 32448 bytes PRCNVM: Size for each file = 2048 bytes PRCNVM: File entries used = 5 PRCNVM: File entries spare = 10 PRCNVM: Directory list for device BB_RAM0 PRCNVM: Entry 0, name = sysdat0, checksum = BF PRCNVM: Entry 1, name = freqdat, checksum = AA PRCNVM: Entry 3, name = email , checksum = B8 PRCNVM: Entry 4, name = screen , checksum = 1C PRCNVM: Entry 5, name = errlog , checksum = 6E PRCNVM: Total of 5 files C:\>NVMDIR eeprom0 PRCNVM: Device information for eeprom0 PRCNVM: Total device size = 32448 bytes PRCNVM: Size for each file = 2048 bytes PRCNVM: File entries used = 5 PRCNVM: File entries spare = 10 PRCNVM: Directory list for device eeprom0 PRCNVM: Entry 0, name = sysdat0, checksum = BF PRCNVM: Entry 1, name = freqdat, checksum = AA PRCNVM: Entry 3, name = email , checksum = B8 PRCNVM: Entry 4, name = screen , checksum = 1C PRCNVM: Entry 5, name = errlog , checksum = 6E PRCNVM: Total of 5 files C:\>nvmdir eeprom0 PRCNVM: Device information for eeprom0 PRCNVM: Total device size = 8192 bytes PRCNVM: Size for each file = 128 bytes PRCNVM: File entries used = 1 PRCNVM: File entries spare = 29 PRCNVM: Directory list for device eeprom0 PRCNVM: Entry 1, name = network, checksum = E7 PRCNVM: Total of 1 files config: CONFIGURATION DATA IS AS FOLLOWS: Board Type => IDE mask Type => 0 LCD Type => 0 After starting with a new disk, this is my RS232 log: ----------------------------------------------------- PRCBBBK: Keyboard type MILI detected, ident = 0x1 PRCBBBK: Keyboard software version = 0x6 IDE_DRV: ide_initialise, bus = 0 IDE_DRV: initialise complete, status = 0 IDE_DRV: ide_initialise, bus = 1 IDE_DRV: initialise complete, status = 0 IDE_DRV: ide_initialise, bus = 2 IDE_DRV: initialise complete, status = 0 IDE_MGR: Bus 0 drive 0, device type = ATA IDE_MGR: serial_no = 'S00MJ10X607839 ' IDE_MGR: revision = 'TK100-24' IDE_MGR: model_no = 'SAMSUNG SP0812N ' IDE_DSK: Drive 0, command sets = 0x7F01 IDE_DSK: Drive 0 using 48 bit addressing, size = 156368016 sectors IDE_DSK: Drive 0 is SMART capable IDE_DSK: Drive 0 SMART enabled IDE_DSK: Drive 0 SMART attributes autosave enabled DEV_MGR: add_device, name C:, SAMSUNG SP0812N IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout ICOFF: File is CYGNUS COFF SH format ICOFF: Reading opthdr. ICOFF: Read file header successfully. ICOFF: Number of sections = 15 ICOFF: Section 0, name = '.vect' ICOFF: Section 1, name = '.int100' ICOFF: Section 2, name = '.int400' ICOFF: Section 3, name = '.int600' ICOFF: Section 4, name = '.ldcmd' ICOFF: Section 5, name = '.init' ICOFF: Section 6, name = '.text' ICOFF: Section 7, name = '.mdata' ICOFF: Section 8, name = '.bss' ICOFF: Section 9, name = '.sys_mem' ICOFF: Section 10, name = '.systack' ICOFF: Section 11, name = '.histack' ICOFF: Section 12, name = '.restart' ICOFF: Section 13, name = '.text.0' ICOFF: Section 14, name = '.text.1' ICOFF: Section '.vect', size zero ICOFF: Reading section '.int100' ICOFF: Loading 48 bytes at address 0x8C000100 ICOFF: Reading section '.int400' ICOFF: Loading 48 bytes at address 0x8C000400 ICOFF: Reading section '.int600' ICOFF: Loading 48 bytes at address 0x8C000600 ICOFF: Reading section '.ldcmd' ICOFF: Loading 528 bytes at address 0x8C000800 ICOFF: Reading section '.init' ICOFF: Loading 432 bytes at address 0x8C000A10 ICOFF: Reading section '.text' ICOFF: Loading 1573312 bytes at address 0x8C000BC0 ICOFF: Reading section '.mdata' ICOFF: Loading 125264 bytes at address 0x8C26FEB0 ICOFF: Section '.bss', no load required ICOFF: Section '.sys_mem', size zero ICOFF: Section '.systack', size zero ICOFF: Section '.histack', size zero ICOFF: Section '.restart', size zero ICOFF: Reading section '.text.0' ICOFF: Loading 660816 bytes at address 0x8C180D80 ICOFF: Reading section '.text.1' ICOFF: Loading 318432 bytes at address 0x8C2222D0 ICOFF: Program entry point = 0x8C000A10 Flushing drive >C:<, SAMSUNG SP0812N and switching to standby SENSE: 0 PAL, 0 NTSC, 0 NO VIDEO ... set to calibration setting Couldn't sense video standard IDE_DRV: ide_initialise, bus = 0 IDE_DRV: initialise complete, status = 0 IDE_DRV: ide_initialise, bus = 1 IDE_DRV: initialise complete, status = 0 IDE_DRV: ide_initialise, bus = 2 IDE_DRV: initialise complete, status = 0 LCD NOT present IDE_MGR: Bus 0 drive 0, device type = ATA IDE_MGR: serial_no = 'S00MJ10X607839 ' IDE_MGR: revision = 'TK100-24' IDE_MGR: model_no = 'SAMSUNG SP0812N ' IDE_DSK: Drive 0, command sets = 0x7F01 IDE_DSK: Drive 0 using 48 bit addressing, size = 156368016 sectors IDE_DSK: Drive 0 is SMART capable IDE_DSK: Drive 0 SMART enabled IDE_DSK: Drive 0 SMART attributes autosave enabled DEV_MGR: add_device, name C:, SAMSUNG SP0812N IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout IDE_MGR: ... timeout *** Software build is incompatible *** Manually setting ethernet to 10Mbps, half duplex Created 5 Image servers Wait for connect on 8234 Created 15 WEB servers Wait for connect on 80 ---------------------------------------------------------- the funny thing is, that the webserver on port 80 works !!! the disk all have 8MB cache, tried it with different sizes, always the same. Does anybody know, why the IDE_MGR: ... timeout happens and if this is the problem ? can it be solved ?