brownleaf

Have remote viewing on iphone with everfocus dvr and linskys router. Works in office and when I leave on errands thruout the day, 5-10 miles away no wifi. When I leave for the day no matter what time 2 or 5 o`clock, it will quit working 1-2 hrs after leaving office. I can drive back to office about 12 miles walk in office and it will work on iphone. I`ve reset router, changed wires, reset app. Its a static ip, nothing changes. My it guy is baffled. Any suggestions?? Been set up for years, just started acting up recently....

Should I replace the dvr and router??

Another quirk to my problem.My daughter and I have same everfocus app on our phone. Hers a Samsung galaxy and my iphone.She arrived early to office and cameras came up on her phone after not working all night. I then tried mine and they worked driving down interstate 15 miles away. So if either of us are inside office the cameras come up fine on other phone . Its like either phone turns on a switch when inside office.

yes

Have a run of 640 feet. I`ve used rg59 with power twice, each lasting about a year, direct burial in conduit. Do I need rg6 for this long run?

Thanks everyone, will try to find a good quality rg59.

Don`t know brand name, rg59 Siamese with copper braid. About $250 per 1000`. What would be a good brand in rg6 Siamese or cat 6? Thanks.....

That's what I thought and have read. I`m either going with the rg6 or cat 6 this time(3rd) and hopes it last more than a year.

Thank You for your opinion.I was leaning this way.....

Need your opinions......buying a new dvr, built in hard drive or swappable hard drives.....??

I noticed today my dvr screen says `load system`at the bottom.I can`t use menu or record, nothing works except pictures on the screen. I`ve tried rebooting but nothing works. Is my harddrive bad?

Have a CNB IR Bullet camera on a 650 foot run. Its works great , but after a hour or so it keeps blowing fuses in 9 power box .I tried switching to another fuse but it blows also. All other ( cameras work fine. Any ideas?? Thanks, James....

Sorry Tailbone, will leave now, btw, I have been using my meter, just didn`t find anything, G`bye...... In blowing three fuses, this happened over a three day period..

Meter is a old fluke 77 digital, don`t think its cheap, but can`t remember what I paid. Maybe you just gave me the answer. Could it be volts may be ok now but when the IR kicks in {during night time} its blowing the fuse.Well, thanks Soundy, will continue to look into this.Its been running fine now for a couple hours.

Thats what I thought at first, but the voltage at the camera is 25.5v

Sorry, its RG59 siamese 18/2

Using RG59, 24v. Thought this size wire was good for 700-800 ft. Cameras been on for over 1 hr now, hasn`t blown yet.On third fuse.I did go to camera and re tighten all connections.

Have a everfocus edvr 9 ch. Recently had a theft and made a dvd for sheriff.Went back to make one for myself and it says Process fail....open dvd device fail. What is this?? Thanks......I`ve tried rebooting dvr twice, no luck..

Looking for a expert in Charleston SC area. I give up on remote viewing of my dvr.Just need someone to do it.After three days my mind and brain have melted...........glad to pay at this point!!!!!!!LOL Thanks!!!!!!!

Is this possible? Have tried everything and nothing works.,setting fixed IP`S, etc according to manual and what I`ve read here. BTW, have a everfocus 9ch edvr.

Man, this is tough, been working on this for days, no luck. Does anyone know of a tech in Charleston, SC that could do this?? Thanks.....

Have a CNB be4815 infrared pointing thru a office window at a gate keypad .At night when the IR cuts on all I see is glare of the front of the camera.Any suggestions?? Thanks.....

I took shield off and stuck it on window, didn`t work.I then put window tint on window, didn`t work..Will try covering up IR tonight to see if I can get a good picture.Then will try covering IR and using a outside light source.Still trying guys!!!!! THANKS......

Rory, What type of camera would you suggest??

Thanks everyone, will try some of these ideas tonight, and hopefully find a solution.... Would another type of camera work for this??