irishcrows

I using Samsung’s Smartviewer to access a DVR of the local network. The DVR is an SRD-1652. When I attempt to perform a search I get the following error: “No permission found”. I get this message whether I am logged in as Admin or a user will full search rights. The tech support at Samsung suggested I upgrade to the latest version of the firmware (v1.12) and the software (v1.14.) I did both with no success. Has anyone encountered this issue, and if so, how did you correct it? Thanks you Michael

Hi I am looking for open source/generic software that will connect and display the camera feed for a DXHD16 DVR. The software that comes with the DVR is not working to my client's satisfaction as it limits what he can display in each camera's tile in the layout. In other words, he cannot utilize the entire tile no matter what aspect ratio he chooses. The software is IPIMS.

It had to do with the permissions on the DVR. The user logging into the software also had to be on the DVR with search permissions.

We recently purchased 3 SRD-1652D DVR's. The spec and data sheets said the Ethernet port is 10/100/1000 Base T. The manual lists them as 10/100 Base T. I connected the 3 DVR's to a DLINK DGS-1008G Gigabit switch that has 8 auto MDI/MDIX crossover ports. I am using new cables that run directly from the DVR's to the switch. The switch tests the cables on all ports to determine the speed of the connection. The test indicates the Ethernet ports are 10/100 Base T. Does anybody know for sure if the Ethernet port on this model is in fact 10/100/1000 Base T?

We are installing a 48 cameras system. There are currently 32 cameras on the system and we are using a computer as our video server. We plan to migrate to 3 sixteen camera DVR’s. The DVR we plan to use is a Samsung SRD-1652d. My understanding is that we can group the 3 DVR’s together in the client software and cycle through the cameras, displaying up to 26 on the screen at a time. Has anybody had any experience with this DVR and the software? I have been unable to find any reviews and would like to be able to get feedback before investing in the system. Thanks you.

Hi Reddal Thanks for the feedback. I am currently testing the Net i-Viewer to see if it meets our needs. One feature I like is the expansion monitors. I will also be testing the SSM software as well - it dosen't require me to use the generic Samsung DVR device as it lists the SRD-1652 in the device list. The software can be found at: http://www.samsungtechwin.com/customer/down_productfile.asp?cid=83&clvl=0&cstep=2#151

Has anyone had any experience with the NFHC-64 capture cards in a PC? It appears you can use 4 cards to allow for up to 64 cards. Is this actually possible and what kind of performance would my client get? Any feedback would be appreciated. Thanks Michael

Hi all A client's server (GV 8.3 I believe) was down over the winter and we lost the registration with dipmap.com for remote access. For the life of me I can't recall how to re-register it. Is there a particular site I need to go to? Thanks Michael

Hi We have a client who needs to expand is camera system beyond 32 cameras. All of his systems are using Geovision cards and software. I have been looking at the GV-900A cards, noting that I can combine two in a PC to get 64 cards. However, the question I have is will version 8.5 of the Geovision software support 64 channels? If so, does anyone have any experience with such a system and what would you recommend as a minimum configuration? If not, how would you be able to combine the two cards as Geovisions card specs say you can? Finally, does anyone know if there are any preconfigured Geovision 64 channel video servers? Thanks very much Michael

Hi I have installed a DVR-9218LV DVR for a client. Currently we have six cameras connected to it. We want to install a microphone with one of the cameras. The DVR has a single audio input on the back. How to I synchronize the audio with the video for that camera? Thanks in advance Michael

Hi all Is their a means of remotely starting the scan for a PTZ camera with DMMultiview. While the camera is scanning I can access the menu and navigate using the up and down arrows. However, once I back out the scan stops and I cannot reenter the menu. It seems the only time I can enter the menu is while the camera is actually scanning. Thanks Michael

Hi We are considering upgrading to the paid service for DDNS from DynDNS.org. Does anybody know the limit on host redirects? It would be nice to have one account that we could use for all our clients with DVR's and camera servers. We are looking at 5-10 redirects. Thanks Michael

I have installed at DW-VMAX8 DVR. In the recording schedule I have marked that there be no recording between 8 am and 5 pm. I expect to be able to see a live feed and I can. However, when I search the recordings video is still being recorded. I have it set to record at all other times. Any idea what could be going wrong? Thanks Michael

I have installed at DW-VMAX8 DVR. In the recording schedule I have marked that there be no recording between 8 am and 5 pm. Is there a way to prevent web access to the live feed during those times? I would prefer that we not be required to unplug the CAT5 from the router. Thanks Michael

Hi DOes anybody know if Geovision allows for autoscan? I have 2 Pelco dome cameras and 1 GC-1480 card. PTZ control works fine on the server, in DMMultiview and over the web. I have tried to configure the cameras to autoscan but with no success. My reseller said all I could do was set a bunch of preset points and have the cameras tour through them, then back to preset 1. He caliamed the autoscan had to be configured on the cameras itself. Does this sound right? Thanks Michael

Hi All When setting up a GeoVision system we built our own video server. In order to control the PTZ Pelco dome cameras we are using a RS-485 to USB cable. While doing research here I noticed that there are GV-COM and GV-Net cards that have data converters. Are these necessary to control the cameras, or is my RS-485 to USB cable sufficient? I was wondering if these cards are doing some with the data from the GeoVision software before sending the control data to the PTZ camera. Thanks Michael

Further to this, I was able to set the autoscan from within the camera, but I then lost all control of the camera from the softweare. I was able to get into to the menu of the camera through the GeoVision software. I can use the U and D keys to navigate. However, ENTER (iris open) has no effect. Is this specific to certain cameras, i.e. I need to use another key instead? I then configured the cameras through the software to tour through 16 presets, and could probably refine it to 64. Not ideal, but it works. While I can regain control of the camera on the server, I can no longer do so using webcam/DMMultiview. I get a message "no PTZ device available. Any ideas? Thanbks Michael

Hi I am using different cameras and acrds but I found that I had the wires reversed on one of my cameras. I just switched them on the RS-485. M

Hi all I am new this forum and desperately seeking some help with an issue I am having with DMMultiview and 2 GV-1480 capture cards. Here are some specs I: OSType=Windows XP SWVersion=V8.3.2 SWApps=RemoteView HWModel=GV1480 PCI Express ProductChannel=16 Cam VideoFormat=NTSC Motherboardl=Intel DG43NB CPU=Core 2 Duo 2.6 GHz Memory=2 GB DDR2 800 Mhz VGA Card=Intel® Graphics Media Accelerator X4500 on board graphics subsystem Bandwidth=LAN NatInstall=Yes FirewallAntivirus=No I have 2 GV-1480 cards running on the server. Server is really good. However, the clients have choppy video. Does anybody know the minimal client requirements for the following: video card RAM CPU We using Giagabit NIC's on the server and the clients, and have a Giagbit router installed. We are using the multiview software to view at the clients, and plan to use webcam as well. (Webcam is running on the server.) The server and clients have DirectX 9 installed. If somebody from your support department could help I would greatly appreciate it. Thank you, Michael