ak357
Dealers-
Content Count
3,033 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by ak357
-
MegaPixel Video Recorders - NVRs, Hybrid DVRs, etc
ak357 replied to rory's topic in IP/Megapixel Cameras and Software Solutions
Does it support megapix ? -
As u know at night time it will switch to b/w mode meaning u have about 1280 pix avail from left to right so in your example at 20 yards wide =60 feet 1280:60 feet ~about 21 pix sorry not good for face id that just my opinion
-
Does any one know this DVR? Pro's and Cons?
ak357 replied to cctv_down_under's topic in Digital Video Recorders
Pelco 4 ch and CBC America are the same I got them direct from Asia -
Which Card to Use...
ak357 replied to Securitymaster's topic in DVR Cards and Software - PC Based Systems
hmm i was told that Aver card will not output IP Cam video by composite output -
Avoid asking for password and username by Avermedia 1304NET
ak357 replied to tonnymathieu's topic in Digital Video Recorders
Try Roboform works great with IE -
Can you leave only Aver card inside comp and let us know if it helps ?
-
CollinR is right remove Hauppauge card I have the same setup at home right now Aver and Hauppauge card dont like each other in my case it's no matter i am just playing with Aver and megapix cam
-
I just picked one of these up, how do you have it set? I.E. frame rate, cif, ETC? BTW if anyone is interested, it is made by SVAT Here is there webpage. http://www.svat.com/productDisplay.php?id=290&categoryNumber=3 it is not made by SVAT it's sold by SVAT
-
Opinions on ACTi 1.3 megapix cameras ?
ak357 replied to ak357's topic in IP/Megapixel Cameras and Software Solutions
Thx for reply I did about 15 Arecont so far so good -
Anyone used the AVerDiGi SA6000e PRO?
ak357 replied to rory's topic in IP/Megapixel Cameras and Software Solutions
I agree with you 100 % have the same problem with my customer asking where is our promised full resolution -
http://www.avermedia.com/AVerDiGi/Product/Detail.aspx?id=14 AVerDiGi SA6032E Series 32 channels Video and Audio input IP & Analog PTZ/ camera control MegaPixel IP cameras supported Multiple and configurable channels display on CCTV monitor Supports Dual-Monitor and Spot-Monitor output Supports up to 136 sensors in/relays Support 352x240 , 640×480 and 720x480, 720x576 pixels (NTSC and PAL) ---------------------------------------------------------- Hmm what happens with megapix resolution ??? I am confuse
-
DSR2000 software- help
ak357 replied to mactech's topic in DVR Cards and Software - PC Based Systems
I think he is talking about pico 2000 card -
------------------------------------------------------------------ If u have retail store u can put your best camera and few other against standard resolution chart which u can pick up in US for about $120-130 and let customer decide after all it is their choice that what i do if u need more info about chart pm to me
-
not bad analysis Scruit, not bad ! what u call "What did they do" shots". I call "lots of nothing shots" That why I start to do more megapix as u know cctv cam and current capture cards simply don't have enough "pixels" to capture what customer want I am trying to follow "60-80 pix rule" meaning if license plate or face is about 60-80 pixels wide we have ok ID now take 720 pix horizontal and divide by 70 = ~ 10 feet if it is less then 60-80 pixels it become "lots of nothing shots" or just good general view and that all hope u can see my point
-
Quad Processor with VGA & Loop out?
ak357 replied to VST_Man's topic in Video Transmission/Control Devices
---------------------------------------------------------------- u can buy very cheap dvr with loop out and VGA output will cost less then mux and video to vga converter -
Hmmm. I'll have to figure out how to mask the plate like inthe pictures above using my video editor - or repeat the test. Let me have a think about that. -------------------------------------------------------------- emAvi----free ,simple, fast
-
Those are D1 an CIF taken from the CCTV... Not sure what you mean by 'original'..? ---------------------------------------------------------- each pix "property" shows as 720x960
-
--------------------------------------------------------------------------- Would be nice if u post picture in original CIF and D1 res Thanks
-
How to make people slow down / stop for my license plate cam
ak357 replied to Scruit's topic in System Design
At the point where u needed put big poster with girl ...... or some stupid or funny writing ,lots of cars will slow down just to read -
Best DVR solution for 31 Camera setup
ak357 replied to mpr86's topic in DVR Cards and Software - PC Based Systems
nothing wrong with system u found but it will not do D1 at 30 frames u will get half about 15, but 32 ch at cif no problem I sell the same product plus their price kinda too high pm to me if u want more info -
Help with a DVR that fits my needs...
ak357 replied to NoFinga911's topic in Digital Video Recorders
Nah, part of hacking means you need to get my IP yourself .. Also I dont run a typical windows server .. And Russians and Chinese? Sorry they cant touch me. I am always ready though .. go for it, first they gotta find me though ps. they got more chance of hacking into one of them Sanyos ----------------------------------------------- relax i was joking, but if u insist plz provide information -
Help with a DVR that fits my needs...
ak357 replied to NoFinga911's topic in Digital Video Recorders
ok ok Rory here what i need from u link to your server then I will ask my russian and chinese friends to look at your..... then we will talk are u ready ? -
Arecont 3130, disappointing image quality
ak357 replied to Kiwi's topic in IP/Megapixel Cameras and Software Solutions
You right about spec of 12.52mm but unfortunately that not what really happened Their housing come from manufacture under spec so they had no choice but to supply shims sometime i use more then one to get what i want I would love to see image if u would tilt camera down a lot -
Can u tell me What do u use for GPS and Overlay unit please ? \ Thanks
-
Put on bench take apart buy Freeze spray start troubleshooting need some tips how to do it pm me