ak357

Common Quantum it is not that complicated Do few experiments 1.plug your headphones into camera and see if its working as microphone ( passive Mic imitations) 2.Connect Audio output from camera with input on your TV ( or any other device with Audio input in your Home) I would expect that camera has Line Level (250 millivolts + Level) and so on .....

Look at this one http://www.iflscience.com/technology/worlds-fastest-camera-takes-44-trillion-frames-second http://www.gizmag.com/fastest-2d-camera-100billion-fps/35058/

1.http://en.wikipedia.org/wiki/High-speed_camera 2.http://www.photonicsonline.com/doc/worlds-fastest-mega-pixel-high-speed-camera-u-0001 Looks like they can do it Can u explain Sunny why not

1 sec sound too long last time I measure my own system at home I got ~ 0.3 sec

Agree Have u ever measure lag between cameras and NVR ? just curios

What exatly does not make sense to you ? just curios

I had the same concern few years ago then I tried few HIK turrets in Alberta and so far so good Now I have lot more of them installed all over the place no problem

Set first NIC for 10.20... second for 192.168... and u done

U can't beat IP 2 MP 30X optical with IR

This "useless" stick running Avigilon client software without any problem

hi. AK. yes the same in the uk native file ... pick and burn is not a option on the hik burn key is marked as backup. just kept it easy for ops direction. Police simply confiscate unit for while happen to few of my customers was homicide investigation

In Canada "backup" will not be accepted in court Backup is copy

May help

I will check if u interested I might have few Netvision cards laying around

Hi where are you located ?

Already got it and sold it works ok

It's call masking login to camera and mask wall on right side of your picture

Start Googling Reverse Port Forwarding Peer-to-Peer Communication Across Network What are P2P communications UDP pinholeing

I am testing a FLIR NVR Model # DNR308PO... It is a 8 channel POE NVR with 2TB HDD... I need to be below 50 watts.. I am between 133 to 150 watts presently... I was hoping someone knew of a NVR that used much less wattage... thanks, Selser I have at home mini PC that use 8 watt so Mini PC 8 watt plus 8 port POE sw about 6-8 watt plus 4 Cam PoE at about 6-7watt u will be using about ~40-50 watt

Just measured for fun 8 ch PoE HIK without HD 12 watts 4 ch TVI without HD about 8 watts

Thx for info I respect effort and desire

Hmm I am more interested what He mean by " restored PTZ assembly using an Arduino"

Good question, I will have to give them another try, I can't remember atm what problems I had in the past... Have you ever seen this using Hik's ddns? All my HIK customers using HIK DDNS No problem

What wrong with HIK own DDNS ? Hik-online.com

Scott have a look for example when u use Joystick So your using an analog joystick with an IP camera. Been there done that. It's impossible to control because of the latency. I am not using anything Just provided example for you