mkstretch
Members-
Content Count
45 -
Joined
-
Last visited
Community Reputation
0 NeutralConverted
- WEBSITE
-
-
I hooked up the camera at the dvr to a channel that allows hd feed but still no luck. I just purchased a ground loop isolator to use at the camera. Also I’m not sure if I’m missing a setting on my dvr that changes the camera type to HDCVI. I only see HD resolution.
-
Thank for the reply! I bought the flir DVR in order to use hd analog cameras. I hooked up the new HDCVI camera to the coax I had a non hd camera connected to. The non hd camera worked with no issues. Where would I check for ground? At the dvr or power supply?
-
I hooked a FLIR M4200 DVR with my analog cameras and everything worked. I then swapped out one camera with an amcrest HDCVI camera. This camera just shows rolling lines. It’s hooked up via coax cable. I’m not sure if the dvr needs to have settings changed? Anyone have any ideas?
-
Why do some DVR’S have only one audio in port? What if you have more than one microphone?
-
Oh ok thank you! I can’t seem to find one that has more than 1 audio input. I have a few mics setup.
-
I’m currently using a digital watchdog VMAX flex but want to upgrade to HD over coax(HD-CVI) any DVR recommendations. THANKS GUYS!
-
Will I get a better picture?
-
Are HD-CVI cameras compatible with an analog DVR? I have a digital watchdog VMAX-flex. Thanks!
-
Not sure if this belongs here. I have the ring doorbell pro hard wired. I am unable to get HD video at all. My router is about 20 ft away. My speedtest at the doorbell with door closed is about 90mbps download and 90mbps upload. I have a dlink router dir 890 try band. Any help would be appreciated. Thanks!
-
My power supply is make big like a clicking kinda sound and the green lights inside are flickering. My CCTV camera are also not coming in the picture is rolling and flickering. Any ideas? Thanks guys.
-
I installed a VmaxFlex 16 channel. I can view it from my phone when not at home, but if i try to on a PC it logs in but i cant view any live video. I can get into the setup screen, but no video. Thanks
-
I opened only one port on the router. I changed the default port of 80 to a new one on my dvr. That is what I used for my router. Their also was only one port listed on dvr under LAN setting
-
I have an everfocus ecor960 8F. I can remote view from my phone but on a computer I cannot. I forwarded the port on the DVR with the DVR's IP address on my fios router. Thanks
-
Ok this is crazy! I can view the cameras from my phone still, but now it won't work on my wife's work PC. I also tried from my verizon wireless laptop with no success.
-
I just tried it again with the no IP address and it worked. Very weird though cause it wasn't working earlier. Hey, thanks a million for taking the time. It's greatly appreciated!