Jump to content

Terminator

Members
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Terminator

    Avtech KPD 674 DVR reset

    The problem seems to be specific to Vodafone, I have tried Eagle Eye using iphone on Orange or O2 network and not problem at all on 3G. However on Vodafone, you can connect to the DVR but not video. Vodafone turned off content filtering so I know it is not that..... Has anyone managed to get Eagle Eye working on their iphone using 3G and a Vodafone network ?
  2. Finally got it working - spoke to product engineer in Taiwan (thank you Chris) who was very helpful and sent me the latest firmware. After I installed it and reconfigured the DVR again, email alert started to work again as can be seen below. Trigger!‏ From: XXXXX (XXXXX@gmail.com) Sent: 27 July 2010 16:18:25 To: XXXXX (XXXXXX1@hotmail.com) Attachments: 1 attachment Motion_20...htm (6.5 KB) Trigger Occur! --Forwarded Message Attachment-- User Name : Password : Channel : Start Time : End Time : Deinterlace Motion detection has to be set up correctly now otherwise you end up with loads of emails in the junk folder.
  3. Hi, I have port forwarding on at the router and I can access the DVR externally. I have set up DDNS and access it via the host name externally. Within the network settings on the DVR, I have DDNS off as the manual says its only needed if not using static IP address...
  4. Hi, IP config shows 192.168.1.5 as my IP addresss and 192.168.1.1 as my gateway and DNS address. This is what I have configured in the DVR but the log shows email send failed. Is there a particular version of the firmware that the AVtech KPD674 has to be on for it to work ?
  5. Hi, I carried out the config as per URL but my AVtech KPD674 still says email failed in the log... could it be the firmware version..my DNS is set the same as my gateway addreess from ipconfig /all Does anyone know what the recent firmware is for this DVR and where I can obtain it from ? many thanks in advance
  6. Terminator

    Avtech KPD 674 DVR reset

    Hi I have AVtech KPD 674 with 500GB HD. I cannot seem to get the iphone app (Eagle Eye) to view the cam's remotely unless I have WIFI switched on. i.e. it does not work through 3G Is there something I need to configure in the DVR, if so, I cannot find any settings for it. Your help is much appriciated...
  7. I cannot seem to get it working with Gmail either... I wonder if you could do me a favour and provide the configuration settings which you have used..... many thanks in advance..
×