Jump to content

vector18

Members
  • Content Count

    1,111
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by vector18

  1. There won't be one more hole cause the camera would be covering it. My idea of replacing the light with a covert camera was because the light is so low and would get a lot of detail and facial ID but you don't want the bad guy knowing there is a camera there so he can't vandalize it.
  2. What about something like this above the door but in an IP version? I see you already have one, but this one has a camera in it.
  3. Usually, a square house I would put one camera on each side and if there are important areas, additional cameras. Your main goal should be all sides of the house, the front door, the driveway, and the street so you can see make and model of the car that drove up to your house by the bad guys.
  4. For the basement entry, I would put the camera on the opposite corner of the house. Where you have it now, you will only see the tops of heads. Or come out of the side of the house with conduit and install a vandal proof dome or covert camera on that cement wall looking towards the doors.
  5. vector18

    cctv grainy pic

    Time for a new camera........................................
  6. I just ordered one from alibaba. Should be getting it in a week or two. Please someone post up some sample shots!
  7. vector18

    cctv grainy pic

    Tell us what kind of camera or model number. Most likely it does not hav DNR, digital noise reduction.
  8. vector18

    my iphone app samsung smart viewer problem

    try to reboot your iphone or delete and reinstall the app
  9. I would chose a camera with an IR cut rather than one without.
  10. vector18

    Mounting Dahau HFW2100

    Since it is so high, you may not need to conceal the wire. Mount the camera on something supportive and put the wire in the hole than caulk it up.
  11. Yes, that is what it is. Too much chocolate. Damn, your as good as a J hook!
  12. I don't know about anyone else, but I'm confused as hell with this question!
  13. vector18

    Mounting Dahau HFW2100

    Umm, stick the wire in the hole and screw the camera to the eve over the hole you just put the wires? Am I missing something here????
  14. vector18

    PAL to NTSC

    Has anyone converted a Dahua pal dvr to ntsc? If so, how did you do it and can you email me the firmware? Thanks.
  15. vector18

    DAhua or WatchDog?

    I install dahua for my own jobs and DW for where I work. I HATE the DW mobile APP and web interface. I think the Dahua app and web interface is much much easier and nicer. My personal choice would be the Dahua dvr.
  16. vector18

    PAL to NTSC

    anyone wanna buy a PAL 8 channel dahua? lol
  17. vector18

    D1, CIF?

    viewtopic.php?f=54&t=27201&hilit=d1+vs+cif The difference is who knows how to search or not
  18. Are you serious? Asking in a forum if it's ok to run cat5 on a J hook cause conduit is too expensive for the customer? WTF is wrong with you? Are you like 9 years old or something?
  19. excellent solution! " title="Applause" /> " title="Applause" /> " title="Applause" /> " title="Applause" /> " title="Applause" /> " title="Applause" />
  20. http://www.nti1.ca/video-splitter.html
  21. http://www.colorado-video.com/video_multiplexer.html
  22. vector18

    Pelco Ground loop isolator transformer

    Thanks, lol
  23. 40.00 plus shipping for this Pelco ground loop isolator. It works perfect.
  24. vector18

    PAL to NTSC

    Do you know this for a fact? I was told different.
×