arris1

Hi all My first post to this forum and would ask some assistance Geovision 1240 card 8 port. Can see 5 cameras but not the remaining three. Can see cameras in advanced settings but they wont come up on screen when viewing all cameras. Can record but cannot for the life of me find any settings other than activating cameras which i have. Some of these cameras are cheap dome type others are profesional samsung etc which i can view.Is there something in the settings i cannot see ? Or is it something in the installation such as power supply, but if i can see the video then why is it not showing up on screen? Any suggestions would be appreciated

Hi All Have a problem with samsung camera (scc b1391p ) that started playing up. The camera was working fine but changes now from working fine to dark/light image although distinguishable video it then comes up with text on feed with . "rom vers 1.3 " Question is there a method of getting into firmware of camera, to possibly make adjustments? The only thing that changed after it was working fine was me changeing all cameras on new distribution box for power because of added cameras. Hope someone can shed some light for me. regards

Thanks Rory found the setting had not ticked the cameras in this location regards

Hi Rory a little new at this can you point me to where these settings might be found. regards

Hi Code58 I am not technically expert enough to test cables that is ( current) etc ,however i do see all eight cameras in advanced video properties and can record all eight cameras. The three cameras dont come up as video lost, if i swap cables to cameras the cameras feed that is switched come up. If i can see all eight cameras in video,have all cameras monitored and can record i would have thought the power supply was ok ( not sure on this). I had added the three cameras at a later stage and seem to think it is something to do with the geovision software that holds some sort of storage file in the settings embedded in xp that is not removed when uninstalling the geovision software just like the password seems to be kept in some file that is not uninstalled. I have uninstalled software and reinstalled but same result? regards

Hi Birdman If i switch the feeds the cameras show up but only the five and can view but the three still dont show up so the cameras can be ruled out. regards