Samiow

Sorry to hijack this thread , I know it is a few months old, BUT just wondered if anybody can post which ini that the device manage saves their details, For some reason no matter what I do mine does not save it and each time I have to re-enter all the details which is a bit of a pain. Thanks for any help. Sam

Hello, Just looking for some help, I have had a Hard-drive failure and as such everything on there was destroyed . I have managed to download the pss software but for some reason the device manage is not holding any details . So each time I open up the program I have to enter the DVR details manually it does not find it on a search or after I have entered it previously. ALSO there is no SAVE button the only way that I can find anything to update the entry I have made is to click on the details I entered and then select the edit button and select save, ( which for some reason it doesn't) Any help or advice would be greatly appreciated . Thanks, Sam

Hello, I have a robox HD cctv16 channel DVr recorder... This series product has the following features: • Real-time monitor It has analog output port, VGA port and HDMI port. You can use monitor or displayer to realize surveillance function. System supports TV/VGA/HDMI output at the same time. My question is what hdmi cable is suitable for about a 15 meter run ( If any ) to view on a Samsung HD smart TV. Thanks for any help offered.

Hello, I am after some help/advice. For some reason the Infra Red led's on my sony cctv camera don't come on when it gets dark , , Works fine during the day. Andy help, advice, ideas would be greatly appreciated. Thanks, Sam

Hello Everyone, Googled a problem which I am having and found this site, It looks good so I registered ,Hoping to get some help with my problem ( I am a complete a Novice and have no experience at all) Thanks, Sam.

Just one thing though, I am trying to set this up from a laptop working wireless on my network, Should I do it from the main computer where the DVR is conected to the router??? Thanks. Sam

Hello, I have tried everything in Rory's sticky with no success, I must point out that I am complete Novice with the CCTV DVR I have a Had8 DVR here is the link http://www.cricklewoodelectronics.com/Cricklewood/product.php?productid=21660&cat=8&page=1 My router is a D-link 2640b it shows the dvr ID as 192.168.1.4 connected port 80 which I have portforward in my router I am trying to view it through jpeg2000 ddns website I entered the details as follows mac address ip 192.168.1.4 port 80 which does not connect, I then enabled remote management thinking that might be the problem and rebooted the router and still no joy. Just wondered if anybody could help/advise me, Thanks, Sam

ok, Thanks, I tried to enter port 80 in my dlink router and it would not work, so tried 82, still wouldn't work. Not sure what you mean by " If you go via the web browser though with those ports you would need to do IP:PORT" ?? Thanks for your help though. Sam

Still no joy, I tried from a friends computer with no joy, Not sure what is wrong , I was told that I have to register my DVR with ddns which I tried until I realised it was the same website as jpeg2000.ddns and that was why it wouldn't except my mac address. it still will not connect all it shows is waiting for connection?? It is very frustrating, Thanks Sam

Ok, well I can view it from my laptop, Both through the internet and with the Lan, So can I assume that I will be able to from another external computer not on my network??

Ok, Little confused now, are you saying that I wont be able to view my dvr through jpeg2000 ddns from my laptop using my network?? Can I only view it externally

Hello Tom, Thanks for your reply, My isp is madasafish. I installed the software that came with is called Netviewer which is ok , So when I type in 192.168.1.4 up comes the menu for netviewer and I can view it . so not sure why I can't with jpeg2000 ddns .