treborsz

Not necessarily - rather than replace the existing drive, you can add another one (there is a place on the DVR to mount two drives) and format only the new disk. And then you say a prayer, and then turn around three times, stand on your head and clap your hands

The HDD change procedure in the M2IP platform is easier then in the previous Legacy platform (DVTR, DVTU, DVTX).

For DM DS2 M2IP HDD change you can use this procedure http://www.dedicatedmicros.com/software_release/download.php?file=1579.

Which version of the DS2 do you have (Legacy or NetVu Connected)?

The procedure, which quoted, applies only to the model DS2 NetVu (M2IP). If you have a different version of the Digital Sprite (DVTR, DVTX, DVTU) - password reset procedure is different.

If you use option 2 (see manual in my previous post, page 3) with format drive I, after confirming the selection the unit will automatically erase all data from drive I (application data and menu settings) and then will install the software revision that is on the CD.

I do not remember exactly, but informations about the passwords are probably on a flash drive (I) which holds application data and menu settings. In my opinion the simplest method is to format the drive I: - DS2 CD Rom Upgrade instructions: http://www.dedicatedmicros.com/software_release/download.php?file=1579 - Full CD Upgrade (178MB) ISO CD image (Zipped file): http://www.dedicatedmicros.com/software_release/download.php?file=1577 (extract the ISO file with CD Image to your PC; burn the ISO file as an image to CD).

You must use the version that is currently running on the CM9700 Matrix Switcher. Here are some examples: - 7.80.003 .EXE w/ Version 7.80.003 Sys Mgr - 8.03.012 .EXE w/ Version 8.03.017 Sys Mgr - 9.02. * * *.EXE w/ Version 9.02.060 Sys Mgr - 9.03. * * *.EXE w/ Version 9.03.032 Sys Mgr Pelco CM9760 Software Archives: ftp://ftp.pelco.com/SupportSoftware/CM97XXSoftware/9760

You need to edit the Webuser.ini file located on the system drive.

Assuming that your LT has one free IDE port: - format a new HDD (on a PC) - install this HDD in the LT - power up your LT - from the Setup Options screen, click Storage - add new volume to the LT database Intellex LT (running software version 5.0) database supports of up to 25TB (on the Windows XP)

The first cable is used to connect the auto-iris control. This lens has a video-drive (with amplifier) auto iris. To work, the camera should have auto-iris video drive (not DC drive). Additionally, you can connect the remote control Level & ALC. The second cord is used for the zoom and the focus control.

The serial data distributor gives serial data from multiple inputs on multiple outputs at the same time. All inputs can be "stand by" status at the same time, but only one controller/DVR will be activated at once.

Outputs wires from CBZ220 -> connection to Pan & Tilt head: White - > Common Brown -> Down Yellow -> Up Grey -> Right Pink -> Left Green -> Automatic Yellow/Green -> GND

DX3100 Series Remote Site Software (5MB): http://www.global-download.schneider-electric.com/85257689000007EE/all/07207CB3559A0DBF8525782D0013B216/$File/dx3100remote.exe Manual (2MB): http://www.global-download.schneider-electric.com/852575770039EC5E/all/A0CA408E19C4C66A852576380063FC99/$File/c661ma.pdf