MLinks

you can use Geo's remote view or use LiveVue made by rory I prefer livevue you can douwnload livevue from download .com

a dongle, green of color! JD The Dongle I got! It's the information inside that even usbmon can't see I'm looking for ? got any .

what r u trying to be sarcastic rory! I can't afford that upgrade yet, heck I'm still working on trying to find a work around to upgrade to 7.0.5

I have a gv800 16ch I have already unchecked cams 16-11 so I'm only using 10 cams . OK so first question is how can I hide the other 11-16 cams when I use the ViewLog program and I choose multiview it shows all 1-16 cams while 11-16 are blank they still appear is there a way to stop them from appearing. And when Geo is loading it states 16ch is being reduced to 10ch's is there also a way to get rid of that as well.

I would use a good quality LCD and just use the DVI port on the Video card as the computer is already giving out a digital signal which is degraded when converting back to analog.

Yes I have restarted the computer and the effects are initializing as far as the GV software (Full screen mode working & not working) except for a pink screen on one of the LCDs everything else works fine and on the windows side everything else works fine . I even played a video on media player and ran a picture slide show. So the problem appears to be limited to Geo. I will try 7.5 software and see if there is any difference. any ideas ?

Also worth mentioning after re-adding the check back to the Directdraw Overlay in the GV software to get the Full screen function working again I went back to the ATI Display properties from the Advanced then ATI Display tab made sure both LCDs were shown then clicked on a Overlay tab found an option says Clone mode options clicked on that tab then had another option for Overlay Mode Settings Standard Theater Mode & Same on all I checked the Same on all radio button restated GV software and no more pink spot but Full screen function was disabled again. sorry for all the detail. plz hlp.

I believe that I'm in clone mode as when I go into Display Properties then Settings then I click on Identify tab both lcds show the number 1 on screen. And also I did remove the check from the Enable Directdraw Overlay then I restarted the GV software and the pink spot was gone the only problem was that I could no longer use the Full Screen option which is needed.

I'm using the ATI 9550 dual monitor card with 1 VGA out & 1 DVI out, and have one pinkout image on the DVI monitor . The software ver is 6.1.1.0 and the card is a ver. 3 GV-800 ... Please advise on a get around with out upgrading the software. Thanx

Anyone know if I can stack any Geo cards yet to put out 20 cams from one machine. ..... There’s a lot of confusion about which Geo cards are stackable. Thanks.

I was looking for the spec's (pin layout, blueprint) for the Geo pigtails, octopus cables or what ever they are called. Any info please post or pm me.

But what about the FPS. GV800 = 120FPS GV900 = 240FPS GV800 might be as good as you say for Remote view, but Vs. gv900 for live viewing, I don't see how that could add up?

I was going to use 2 GV900 16ch ver 7.05 .

Thank you CameraGenius. I will go down the 2 DVR 16ch route.

I need recommendation for good 32 channel DVR card for a custom system some thing similar to GeoVision in as far as functionality would be nice. Or should I use 2 16ch GV1240 cards with GeoVision Control Center that allows remote monitoring many DVR sites. One of the main requirements of this system will be Remote monitoring If anyone has done this before I would really appreciate your feed back or any suggestions. Thank you.