jsteinb56

Thanks Rory

Hi I’m having problems with DF8000 DVR Card it’s using the cpu 100 % and the remote viewing is very bad I can’t hear the voice to I have good computer Pentium 4 (3GHZ) With 800 GB HARD DRIVE and 1 GB of memory good video card internet connection 1.2MB please informs me of you have any update or if there is any specific config Thanks for your support [/img]

The 100 degree temp I would not worry about. But the single digit could be a problem . Is there a room where you could put the unit and also put a thermostat activated electric heater. they are very cheap and work very well in restrooms in warehouses and such to keep pipes from freezing . Also in an earlier post someone mentioned just building or buying a cabinet for the unit , the pc itself wil generate more heat than you think. If it is a fairly close quarters cabinet it will heat itself. Of course then you need to watch in the summertime for proper ventilation as the case will overheat. That can be solved by installing some small fans in the side of the case . I hope this helps .

We have an outside building that we keep some storage in and we keep a pc terminal in there hooked to the network. It can go anywhere from 25 degrees to 95 degrees and it has never affected the PC. What are the lowest and highest temps that you think the area will reach.

You need to go back in your configuration settings and go over your preferences for screen setup

Sorry about that I need to read first. You can always try it and test run and see if you have any problems. Just avoid VIA chipsets with the GEO cards.

What is the chipset on the motherboard that you want to use?