Jump to content

stealthrt

Members
 View Profile  See their activity

  • Content Count

    9

  • Joined

  • Last visited

Community Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. stealthrt
    The free version allows 8 up cameras. and all of the settings for each camera are identical other than their IP address.
  2. stealthrt
    But that doesn’t explain why one works when the other 3 do not?
  3. stealthrt
    No name branded.
  4. stealthrt
  5. stealthrt
    They are your typical Chinese IP POE ptz dome cameras.
  6. stealthrt started following Help with Exxis video camera and RJ11E to BNC and Luxriot Set up 4 IP POE PTZ cameras only 1 works.
  7. stealthrt
    Hey all. I have been trying to setup this Luxriot EVO free edition for hours now and still am not able to get it to display my cameras. The first camera I added seems to have worked when clicking on the camera name and then clicking on Show video in the Channels section: I created a channel for it called Cam Channel Group and placed the Cam 223 into it: In the Monitoring tab when selecting the Devices menu I have a working camera. And on the Channels menu I again confirmed I have a working cam: Lastly on the Streams menu I have a good cam: Ok great. I confirmed I can view the camera and that the camera is setup like it should be. When I start up the Luxriot EVO monitor I am unable to find it ANYWHERE! Nothing at all is listed under the Channels menu when, I would think, my Cam Channel Group should be listed? If I go back and add a second camera it then tells me Unauthorized (401)...???? And the Channels menu in the monitoring tab looks like this: I made sure both cameras had the identical settings via their web page and they do. I also tried my other 2 cameras just to make sure it wasn't a fluke but was greeted with this: So this is where I am stuck. Any help in getting this to work would be great because I really like the program (What I can run on it that is))!
  8. stealthrt
    Sent you an email! David
  9. stealthrt
    Thanks for the feedback, rory Wish i knew for sure what the pin layout was, though! David
  10. stealthrt
    Hey all i am new to all this sercurity cam stuff and i have 4 Exxis cameras that have a RJ11E end on them. I have a DVR card in my PC that only accepts BNC connectors. I was looking around seeing if i could find the pin out for the RJ11E connector but have been unsussessful. The only thing i can turn up is this: Taking if the pin out above is correct then i would guess i would tie the ground and video to the bnc connector and then ground and 12v DC to the power supply? Can anyone confirm this? My Exxis camera looks like this: Mace seems to carry a converter for this type of thing but its $24.94/each!!! Thanks for any help on this problems of mine! David
×