Jump to content

ljarrald

Members
  • Content Count

    487
  • Joined

  • Last visited

Everything posted by ljarrald

  1. there is indeed. W-dnn60lfAQ i put a thread on here somewhere with a diagram and stuff. but i can't find it.
  2. is this taking the pish out of a post i've missed? if so, can i have the link to the original? if not, this is brilliant
  3. my keyboard is 3 axis, but i prefer to use it as if it was 2. joystick for pan and tilt, and buttons on the controller for zoom/focus/iris/etc
  4. i know that to install cctv properly, i should test that the video signal at the DVR is 1V peak to peak. i have an old 2 channel CRT type oscilloscope. it has BNC connectors that the 'probes' plug into. can i plug the camera cable directly into the front, or does it have to go via the probe? although i have had the oscilloscope for 3 years, i've only used it twice so am not too familiar with using it. any help would be great, thanks
  5. ljarrald

    oscilloscope, help please?

    thank you! my DVR has two BNC connections for each channel. they can be used to loop the video signal through the dvr to other things. should i be putting a 75OHM terminator on each 'loop out'? or will my DVR have one built in? thanks.
  6. my guess would be that the camera is not getting enough voltage. i have had cameras giving similar video outputs and the problem turned out to be big voltage loss.
  7. ljarrald

    cctv attack detection - VIDEO

    i have a few cameras in places with a high risk of attack. one of them has actually been attacked with a brick in the past. i bought some shock detectors off ebay. they are usually used on door and window frames in burglar alarm systems. i have mounted one inside each camera that risks being attacked. because i have run cat5 to each camera, i just used a spare pair for the alarm contacts. and then conneced them to the relevant alarm input on the DVR... as i say in the video, nobody has attacked the cameras since i've made these modifications. but my dad dropped a brick on one of the cameras the other day and sure enough, the sounder screamed its head off! i took the dome off and flicked the sensor in the video because i don't want to hit the camera in case i damaged it. sChpgl2GXfg if the video doesn't load, use this link.
  8. ljarrald

    cctv attack detection - VIDEO

    yes i'm working on a system that will send my phone a text if the cctv does anything like an alarm, or if the fire alarm activates and stuff.
  9. ljarrald

    Anti Spray Cover Dome

    it took a bit of fiddling, but eventually i got it right so it didn't effect the image. i'll remove and replace it and get some before and after shots for you, when i have time.
  10. ljarrald

    Anti Spray Cover Dome

    i've put clingfilm on my vulnerable cameras. its not the best solution. but it does the job. if (when) the camera is sprayed, i just remove the clingfilm and replace it. nice and cheap too
  11. ljarrald

    Metcctv

    Hi everyone. i can do it for £1.32 less than their quotes and am also based in Manchester.
  12. ljarrald

    Sick as a DOG this Morning.

    ouch. what's the bet they get a useless Chinese system from ebay?
  13. i have some PIRs and beam sensors that i will soon be installing to cover several of my cameras FOV. the detectors will put the DVR into 'event' mode. i am using sensors because i am fed up with the unreliability of using motion detection from the camera feed. the only inputs my DVR has are alarm inputs which i DO NOT want to use! the only way i can put the DVR into event mode externally is through the RS-232 port. i have never done any serial comms before so don't really understand what the manual is telling me. to start with, i will be using my computer to test things out (i already have a usb to rs232 adaptor) please, could someone explain to me what the manual means? and what would i have to send to the DVR to, for example, put camera 3 into event mode, and then take camera 3 out of event mode? thanks in advance!!!
  14. yes iknow. sorry, i didn't mention that i will be making and programming a device that turns dry contacts into the correct data string. BUT. before i make it, i want to know what i am doing, hence why i want to play around with a computer connected to it first. so that i know *exactly* what i need to send for each thing. it will make programming and debugging easier. alarm inputs are not an option as the alarm inputs for most of the cameras are already used. each camera channel needs to have alarm input, AND event input. this is the reason i can't use the alarm inputs. basically, i will be making something like the thing you have linked to. i would buy the one you linked to, but i am trying to do it for as little money as possible. i just need some guidance as to what to actually send to the DVR to get me on my feet. is it wanting binary, text, etc? thanks for your help
  15. ljarrald

    Caught on security cameras?

    i liked this until i realised it was a coke ad. boooo. take the coke bit off and its brilliant
  16. What's your poilicy- shoot first and ask questions later? Or would you talk and disarm him? Hold him until the police got there? Truly shoot to kill? First off, it's scary to see those pics but great you got it recorded. Here in NY, pulling the trigger at any time openes up a major investigation. Even if you're in the right such as your case and it's deemed so in the end, there is MAJOR answering due for pulling the trigger, man. You pull that trigger, you damn well better be sure it was justified to use that force. That, coupled with the fact that most people actually can't kill in cold blood- even if it's warranted- is what makes this area a tough one for the innocent, the homeowner. It's the inability to actually pull the trigger on someone that many times gets YOU killed. Rather than shoot to kill, something not many are truly trained to do, we tend to warn people and avoid shooting. And that very thing is what puts us at so much of a disadvantage with hardened criminals. I'm glad it didn't get to that far for you. I hope it never does. I'm glad your cameras got the footage. And I really hope you're never faced with such a desicion in the future again. exactly. you threaten them with a gun *in your home*, they leg it, they come back, and shoot you. or you shoot them to harm but not kill them, they come back and shoot you. just like here in the UK with knives. many young people (unfortunately) carry them because they're idiots. they get into some trouble, pull the knife, the knife gets turned on them, and they end up getting stabbed with their own blade.
  17. ljarrald

    My funeral, How do you plan to go

    yeah, nobody is allowed to wear black. people will have to be all colourful and stuff. i'd like to be blasted into outer space. but i don't think i'll be able to afford that
  18. ljarrald

    in-line add-on mic buzzes

    sounds like the DC adaptor is cheap and doesn't regulate the power... try putting a voltage regulator on the output of it.
  19. ljarrald

    One DVR, Multiple Screens & DIFFERENT VIEW

    Can you please guide me how to connect a multiplexor for that purpose? much thanks you would connect the cameras you want the guards to see to the DVR AND to the multiplexor (you would probably have to use a Y connector to split the signal unless the dvr has 'through' connectors) and then set the multiplexor to display the grid arrangement you want and feed the output to a monitor in the security office
  20. ljarrald

    One DVR, Multiple Screens & DIFFERENT VIEW

    or you could use a separate multiplexor
  21. ljarrald

    Help with Night Vision

    yes, easily. you just need basic electronics knowledge and good DIY skills which i guess you have if you've installed this system.
  22. ljarrald

    redwall for floodlight?

    hi guys, i am ready to install a PIR to cover my back yard gate and put the DVR into 'event' but i also need a floodlight out there for when it gets dark. i want the floodlight to be PIR activated. it would be a lot better for me if the redwall could activate the DVR and the floodlight. i know how to wire it up to do that and stuff. but my question is basically will the floodlight activating and deactivating effect the pir? thanks in advance...
  23. ljarrald

    IR filter?

    Yes, that should work since the filter is blocking IR light from geting to the sensor; but then, if you remove the filter, the colors the camera will see during the day will be a little bit unreal, since it will also be catching IR from sunlight. hrm, i feared that may be the problem, i guess thats why the old camera saw things like leaves as purple :/ the camera will be in a shelter infront of the door so shouldn't get too much sunlight. but do you think it would be better to leave it on? [edit] that screenshot is from the current camera, not the one i've modified.
  24. ljarrald

    IR filter?

    i have upgraded the internals of one of these cheap 'eyeball cameras' because the old lens was varifocal but not auto iris and the sensor chip was rubbish! the camera now has an auto iris varifocal lens with a good quality sensor chip BUT the IR LEDs prove to be useless with this sensor chip. i know that the lens should have an IR cut filter, but it doesn't. i have had a look on the sensor chip and infront of the sensor is some blue glass. if i remove this, will the camera be able to 'see' ir? other than a different sensor chip, my next best option is to replace the IR leds with white ones :/
  25. ljarrald

    Camera to cover driveway at a distance and close up.

    why not just go for an external IR illuminator?
×