ssmith10pn

Exactly..

It was port 80 I'm sure. Did you try to connect via ONVIF or the Axis Camera driver?

Can you search by transaction though?

Maybe a distant 3rd.

Axis is the most widely compatible of any camera line. I can't think of any third party VMS software that doesn't support Axis. They wouldn't stay in business very long if they didn't.

Absolutely! The only thing worse than Arecont is the older GE stuff! I have 2 sites that I manage that are 1500+ Everything that dies gets replaced with Axis. New construction gets axis. The new Axis Q6114-E, Q6115-E, and the just released Q6128-E PTZ cameras are off the chain. And they are 1000.00 cheaper than the Q6042-E and Q6044-E PTZs. The Q6128-E is a 4k PTZ. The hospital I manage is all Avigilon. And that product has been flawless.

I would do a low gate with a mag lock on it like Gym's do. Or some type of open turn style.

Are you in server view or site view?

Here's a 26 port switch with 12 ports of POE. http://www.newegg.com/Product/Product.aspx?Item=N82E16833150122 100 dollars more here is a 28 port with 24 ports of POE Plus http://www.newegg.com/Product/Product.aspx?Item=N82E16833422104 Here is the 850nm (550Meter) SFP module 100% compatible with Cisco http://www.axiommemory.com/config/products/branded/GLCSXMMRGD-AX.aspx Neweggs Price http://www.newegg.com/Product/Product.aspx?Item=N82E16816611193&ignorebbr=1&cm_re=SFP-_-16-611-193-_-Product

Too short of a run for Single Mode. How many POE ports do you need on the switch?

You don't have to worry about lightening with fiber. I would use 62.5 Multi Mode with 850nm SFP modules, and switches with SFP slots. Media Converters is just another part to fail. What kind of environment would the switches be in?

Failed Hard Drive?

Did you try to find it with the discovery tool?

I have customers request Credential history reports for that very reason.

I have a customer using these: http://www.utcfssecurityproductspages.eu/HQ/products_single.php?product=TVD-M1210W-2-P http://www.utcfssecurityproductspages.eu/HQ/products_single.php?product=TVD-M3210V-2-P http://www.interlogix.com/video/product/truvision-nvr-21

They have a mix of new and old GE stuff. All the old stuff is getting replaced. All the new GE stuff is rebranded Hikvision cameras so they work just fine. Interesting. I wonder if Hikvision Cameras will work with a Interlogix NVR?

Interesting. So where does that leave 75v PA and intercom systems?

75V can kill with right current So can a 9v battery but the code considers anything below 75v Low Voltage.

Low voltage is anything under 75v

If it's a fire wall then yes use the metal cut in box. If it's not a fire wall then use the plastic ring.

What GE cameras? The new Interlogix stuff?

If you have a current SMA with Genetec you should be able to upgrage to 5.3 SR3 (The current version) If all your cameras are compatible with Avigilon then that would be an option too.

Yes with Avigilon VMS. I have not talked with anyone that has tested it in Genetec.

5.3 SR2 addressed this. This was a reply to an Axis Q3709 which has multi sensors.

Couple of samples I made with this camera.