icek

Its a genuine card from a legitimate source and card appears to be genuine according to the geo fake card URL. I will check the directx / interlace overlay and report back

Just recently got my GV 800 system working on the setup below :- P4 3.0Ghz, 800FSB, 2MB Cache / 64 ECS 915PL Mptherboard with Intel 915 chipset 512MB DDR400 RAM 80GB Primary HDD and 160GB Sata drive for CCTV storage Nvidia 6500 PCI Express 256MB Windows 2000 SP4 8 cameras Problem : When you view the cameras on the main screen in the different modes that are available at bottom of the screen, i.e 1, 4, 8 camera views etc the motion on the main camera i.e the larger screen does not show, it is as if it remembers the last snapshot, When I switch that camera with another, motion starts but then the other camera only shows a snapshot. This is strange as the recording continues in the background with full motion....

Problem resolved ! It was a USB issue, in that the USB occasionally tripped or intermittently failed - can't think of a better term to explain. Anyway, I have a Sony 17" monitor which has built in USB ports, the monitor in turn is connected to the PC via a USB extension lead. I noticed that I got the same dialogue box / control character error whenever I switched off the monitor, with the USB dongle plugged in the monitors USB ports. I decided to connect the USB dongle directly into the back of the PC onto the mainboard without any extensions and I have not had any more problems since - well for the past couple of days anyway. Conclusion ! Monitor USB ports switched off whenever monitor is switched off and occasionally even when monitor was left on. The dongle missing dialogue box should be legible i.e in english or installed language. If this had been the case I think I would have resolved the problem sooner. Rory FYI - The Geo software works on windows 2000 SP4 and also win2k3 server G22 FYI - I am using Kingston and have also used Elixir Wildcard - It was a weird problem, but I have managed to resolve through a process of elimination, as stated above would have resolved sooner if the dongle error had been in English. What language does anyone else get this dongle missing error in, is it in English, installed language or other i.e system control characters ...

I have a GV800 card installed with Geovision 7.0 software installed running 8 cameras. Installation went fine, however, Geovision restarts after about 1 - 2 Hrs and loops with one error which is a dialogue box with control characters ( I have seen this error when the USB dongle is not inserted). I say control characters because they are not legible and could be that I have not got chinese or someother lanaguage pack installed. The second error comes occassionally but usually after the above dialogue box has appeared on my screen numerous times. "The instruction at 0x73d31351 referenced memory at 0x00000004, the memory could not be read" This is the second MB, CPU and RAM I have tried and I know they are fully working as I have tested with HW diagnostic utilities and used in another machine with no problems. My setup is listed below :- P4 3.0Ghz, 800FSB, 2MB Cache / 64 ECS 915PL Mptherboard with Intel 915 chipset 512MB DDR400 RAM 80GB Primary HDD and 160GB Sata drive for CCTV storage Nvidia 6500 PCI Express 256MB Windows 2000 SP4 Hoping someone can help

The CPU is Intel Celeron 2700 Mhz The Board is MSI MS6526G The Chipset is Intel Brookdale I845G Standward windows firewall and no AV - yet ! Its a dual boot system that I am running and until it all works on windows 2003 Server, I will continue to use windows 2000. I have the appropriate firewalls, AV etc on Windows 2000

Hi all Bought a 16Channel CCTV DVR card last year from China via Ebay. Asked the seller if it worked on 2003 Server and the answer was yes. Anyway to cut a long story short, got the card which did not work on 2003 but did work on windows 2000 and after alot of messing about and not much help from the supplier, I managed to get it working on Win2K and it has been very stable. HW is a P4, 2x80GB HDD's and 512RAM using an Application called Safeking which looks and feels like magicradar and Kd-Net. Obviously I want to be able to use this card on a windows 2003 server and I came across this forum and have managed to get the card to work using KD-net software. Problems 1 CPU is running at 95-98% which is too high 2 Remote connection via KD-Net client will connect but no video Also is there any other software which is compatible with this card and better.......