erict@airweld.net

what do you mean i have to change my acl to allow the same traffic to pass that you have the NAT's setup for. Can you give me an example

Yes there are two dvr's, both do not work. The access list is applied to both incoming and outgoing on the interface.

Here is a copy of my nat translations and my acl.... I can telnet from the internal network I will try from internet tonight... ip nat inside source static tcp 192.168.7.110 9000 66.251.104.162 9000 extendable ip nat inside source static udp 192.168.7.110 9000 66.251.104.162 9000 extendable ip nat inside source static tcp 192.168.7.110 8003 66.251.104.162 8003 extendable ip nat inside source static udp 192.168.7.110 8003 66.251.104.162 8003 extendable ip nat inside source static tcp 192.168.7.110 8002 66.251.104.162 8002 extendable ip nat inside source static udp 192.168.7.110 8002 66.251.104.162 8002 extendable ip nat inside source static tcp 192.168.7.110 8001 66.251.104.162 8001 extendable ip nat inside source static udp 192.168.7.110 8001 66.251.104.162 8001 extendable ip nat inside source static tcp 192.168.7.110 7000 66.251.104.162 7000 extendable ip nat inside source static udp 192.168.7.110 7000 66.251.104.162 7000 extendable ip nat inside source static tcp 192.168.7.110 2000 66.251.104.162 2000 extendable ip nat inside source static udp 192.168.7.110 2000 66.251.104.162 2000 extendable ip nat inside source static udp 192.168.7.110 8000 66.251.104.162 8000 extendable ip nat inside source static tcp 192.168.7.110 8000 66.251.104.162 8000 extendable ip nat inside source static tcp 192.168.5.110 9001 66.251.98.182 9001 extendable ip nat inside source static udp 192.168.5.110 9001 66.251.98.182 9001 extendable ip nat inside source static tcp 192.168.5.110 9000 66.251.98.182 9000 extendable ip nat inside source static udp 192.168.5.110 9000 66.251.98.182 9000 extendable ip nat inside source static tcp 192.168.5.110 8003 66.251.98.182 8003 extendable ip nat inside source static udp 192.168.5.110 8003 66.251.98.182 8003 extendable ip nat inside source static tcp 192.168.5.110 8002 66.251.98.182 8002 extendable ip nat inside source static udp 192.168.5.110 8002 66.251.98.182 8002 extendable ip nat inside source static tcp 192.168.5.110 8001 66.251.98.182 8001 extendable ip nat inside source static udp 192.168.5.110 8001 66.251.98.182 8001 extendable ip nat inside source static tcp 192.168.5.110 7000 66.251.98.182 7000 extendable ip nat inside source static udp 192.168.5.110 7000 66.251.98.182 7000 extendable ip nat inside source static tcp 192.168.5.110 2000 66.251.98.182 2000 extendable ip nat inside source static udp 192.168.5.110 2000 66.251.98.182 2000 extendable ip nat inside source static udp 192.168.5.110 8000 66.251.98.182 8000 extendable ip nat inside source static tcp 192.168.5.110 8000 66.251.98.182 8000 extendable access-list 102 deny 53 any any access-list 102 deny 55 any any access-list 102 deny 77 any any access-list 102 deny pim any any access-list 102 deny ip 192.168.1.0 0.0.0.255 any log access-list 102 deny ip 192.168.254.0 0.0.0.255 any log access-list 102 permit tcp host 24.185.35.202 any access-list 102 permit tcp host 24.186.247.138 any access-list 102 permit tcp host 24.190.165.75 any access-list 102 permit tcp host 24.190.9.211 any access-list 102 permit tcp host 69.123.114.95 any access-list 102 permit tcp host 24.186.247.37 any access-list 102 permit tcp host 24.187.33.186 any access-list 102 permit tcp host 69.117.246.208 any access-list 102 permit tcp host 69.119.136.54 any access-list 102 permit tcp host 69.113.138.131 any access-list 102 permit tcp host 69.123.13.254 any access-list 102 permit tcp host 24.185.39.201 any access-list 102 permit tcp host 69.123.2.57 any access-list 102 permit tcp host 69.123.36.245 any access-list 102 permit tcp host 69.123.166.205 any access-list 102 permit tcp host 69.123.120.238 any access-list 102 permit tcp host 68.194.200.118 any access-list 102 permit tcp host 68.194.207.218 any access-list 102 permit tcp host 69.123.54.232 any access-list 102 permit tcp host 24.45.120.185 any access-list 102 permit tcp host 24.186.45.60 any access-list 102 permit tcp host 24.191.20.182 any access-list 102 permit tcp host 24.190.14.18 any access-list 102 permit tcp host 68.194.202.89 any access-list 102 permit tcp host 69.113.137.33 any access-list 102 permit tcp host 24.186.236.138 any access-list 102 permit tcp host 24.191.23.61 any access-list 102 permit tcp host 69.123.162.81 any access-list 102 permit tcp host 24.184.121.111 any access-list 102 permit tcp host 68.194.195.147 any access-list 102 permit tcp host 68.194.203.58 any access-list 102 permit tcp host 68.194.199.79 any access-list 102 permit tcp host 24.191.21.161 any access-list 102 permit tcp host 24.187.57.13 any access-list 102 permit tcp host 24.189.20.120 any access-list 102 permit tcp any any established access-list 102 permit ip host 24.186.93.152 any log access-list 102 permit tcp any host 66.251.98.182 eq smtp log access-list 102 permit udp any any eq domain access-list 102 permit udp any eq domain any access-list 102 permit tcp any any eq ftp-data access-list 102 permit icmp any any echo access-list 102 permit icmp any any echo-reply access-list 102 permit ip 204.212.166.0 0.0.0.255 any log access-list 102 permit ip host 208.8.251.51 any log access-list 102 deny ip any any log access-list 102 permit ip 192.168.1.0 0.0.0.255 any log

I can view the cameras from the internal network...

I can access the dvr from the internal network. I can access the dvr from the internet as well, I can even get into the remote configuration screen to change settings but when I go to view the live cameras it tells me connection failure.

According to digimerge all the ports that need to be fowarded are.

Does anyone know how to set up a digimerge dvr for remote access going through a cisco 2600 series router. I have fowarded the ports I was told I have to with nat translations in the router. I can connect to the actual dvr through the internet, I can imput my password, however when I go to click on a camera it takes about 25 seconds before it comes back with connection failed. Can anyone help me?

Hello....I have a Digimerge VCD-316 in two seperate locations. I have configured nat translations in my cisco router and have an access list. I beleive I am fowarding the ports correctly but for some reason I cannot connect remotely. Here is my nat translations: ip nat inside source static udp 192.168.5.110 11000 66.251.98.182 11000 extendable ip nat inside source static tcp 192.168.5.110 8000 66.251.98.182 8000 extendable ip nat inside source static udp 192.168.7.110 11000 66.251.104.162 11000 extendable ip nat inside source static tcp 192.168.7.110 8000 66.251.104.162 8000 extendable. I was told that these are the port fowards from Digimerge: TCP Ports 7000 (login port) 8000 -> 8001 (live video port) 9000 -> 9001 (remote playback port) 2000 (remote config/web port) UDP Ports 11000 (data synchronization port) However, they really only give support for linksys routers. Can someone help?

Can anyone tell me who makes the best DVR with Remote monitoring and remote configuration and ease of setup.

Hello....I have a Digimerge VCD-316 in two seperate locations. I have configured nat translations in my cisco router and have an access list. I beleive I am fowarding the ports correctly but for some reason I cannot connect remotely. Here is my nat translations: ip nat inside source static udp 192.168.5.110 11000 66.251.98.182 11000 extendable ip nat inside source static tcp 192.168.5.110 8000 66.251.98.182 8000 extendable ip nat inside source static udp 192.168.7.110 11000 66.251.104.162 11000 extendable ip nat inside source static tcp 192.168.7.110 8000 66.251.104.162 8000 extendable. I was told that these are the port fowards from Digimerge: TCP Ports 7000 (login port) 8000 -> 8001 (live video port) 9000 -> 9001 (remote playback port) 2000 (remote config/web port) UDP Ports 11000 (data synchronization port) However, they really only give support for linksys routers. Can someone help?

No i am going directly from the ptz camera to the 485a and 485b connections

Please Help!!!!!! I am trying to hook up a Kalatel CyberDome PTZ camera to the digimerge vcd-316 dvr. I have the kalatel ktd-312 interface but I do not have a serial connection in the back of the dvr. The only thing there is ALARM/SENSOR/RS-485 slot that I have to wire myself. And it is not going well. Please can some one help.