DNAcctv

Can anyone help me figure out why this camera is acting this way? I have a "test" cat5e run on the ground from Veracity EoC to a switch, then switch to the camera. All electrical lines are out of range.

WireGuys, The firmware is updated and I did a factory default. That is one of the odd things: 1. It does not happen in the camera GUI through Veracity 2. Only in NUUO AND only through the Veracity EoC. 3. I can take the camera back to the IT room, plug it into the switch beside the server and it works perfectly in NUUO via ONVIF. No Veracity EoC.

I am replacing the switch first. I don't have a lot of hopes with that but maybe... I am thinking more along the lines of "bad manufacturer". It may be that the Messoa "ONVIF" connection to the NUUO VMS through the Veracity EoC is just not up to the task. Thanks for all the input John. I am looking forward to the IPVM University coming up.

The camera is Messoa NDR891. Set to CBR bit rate 8000. Brand new install and the camera started acting this way. I tried dropping the resolution all the way down to "D1" with the sames settings. It was still causing the issue.