dodgevan

Having upgraded to windows 7 ultimate from xp pro. When i load the drivers for the nv5000 card i now get BSOD 6.1.7601.2.1.0.256.1 message come up if i disable the drivers all is well. Has anybody got any ideas?

Thanks for that

Hope you can help I am running an avermedia nv5000 card with baxall camera and ernitec 6.90 motorized lens. The system is wired in cat 5 with baulns The problem i have is the camera has been fine for a couple of years now all i get is a white screen . when is starts to get dusk the camera is ok in daylight its white. I have taken the camera down wired it into the card and all is ok i put i back outside and back to the white screen. Any ideas As i have not changed a thing.

Sorry i imformed you wrong. I am useing the 9v battery just to set up the zoom . The iris is controlled from the 1amp power supply

I am setting the lens up with a 9v battery once focused that will be it.

No i am not useing any power to control the lens.

Camera was wired first useing cat5 cable with LLT-202c baluns which i have changed. I am useing a 1amp power supply on just one camera. Cable length is about 30feet. I appreciate your help.

That was the first test i tried all is well on that front.

Tried ajusting brightness noise etc still the same. But when it starts to get dusk it works great. Had differant cameras set up still the same . Its worked fine for a few years till now.

Have tried different cameras. The camera i am useing is a Baxell with Ernitec zoom lens

I am still having problems with white screen. Tried just about everything. Any ideas ?

Had the same problem today after installing the card. It turned out that the setting was not set to PAL. Works fine now.

Does anyone know where i can get an avermedia nv5000 card repaired.

Replaced the baulns . That did not work So to update what i have done . I changed the camera Tried another lens Changed the cable Changed the Baulns Took out the card and tried that in another computer. And i still have a white screen in the day fine when it starts to go dusk . The only bit that has not been changed is the board so i am wondering if its duff.

the only other thing that it could be is the baulns. I have ordered some new one to try. keep you posted

Tried another camera checked cables all is ok. Could it be the card ?

Replaced the lens and i still have a white screen in the day ok at night.

Checked the lens that is ok.