fragmental

Hi Guys , I`m trying to figure out what equipment I would need to transmit two analog cams about 1200'. From what I've read so far a system like this would work. 1, 4 channel Video encoder, ex. ACD-2200 2, Ubiquiti Bullet m wireless devices 2, directional antennas for above units 2, Decoders(unless there are duals or quads available) 1, month of reading to make the above items work together Could I use IP cams and drop the encoder. Would I then need something to combine two cams?

I`m from Nova Scotia. I did check and they have internet at both these buildings. Could IP cams work here I didnt know if I would be able to convert this back into analog video for the existing DVR.... is this an option? My main concern is a reliable system with good performance. If its going to take 2-4k in hardware to make it work right that's fine as long as I know how to bid on it:)

Thanks for the response. It might be best if I was to contact someone who sells some of this equipment and let them help me put together a package for this. Any suggestion of a good supplier in Canada for cctv stuff. Are there better quality rf video transmitters that would do a decent job over 1200 feet or is it just not happening.

Hi guys, I`m trying to put together a system and I need some help if possible. I have 20 years experience as an electronics tech but the cctv thing is new to me so be gentle lol. I've drawn a rough sketch of layout of the cameras and buildings and I'll try and link it here. http://img638.imageshack.us/i/camsystem.jpg/ I need to add 3 cameras to an existing analog DVR system.These cams are outside and 2 of them will be mounted to the top of 30' telephone poles. Any suggestions on cameras? I'm guessing they will have to be high res to cover the area I need? Can i use the existing 600' of rg59 for one camera? Can I bury my other camera wires along with the AC wires to power the Cams and any suggestions on wire type would be great. I'm guessing twisted pairs with Baluns? Can I transmit the video back to the main building 1200' reliably? I see some 2watt 2.4ghz transceivers on ebay cheap... would they work? Sorry for asking so much, I only have a week or so to let them know if I can put together a system that will work so any help would be appreciated. Les

Hello from Nova Scotia Canada. I own a small electronics repair shop and have started doing some cctv work recently. It seems some of these systems are outside of my comfort zone lol. Hoping for some advice along the way:)