t3chsupp0rt

If you read my last post you can see I said yes I get MD records from animals (when they pass into my grid of MD) but I don't have shadows or weather to worry about because my camera is mounted where it's always shaded, and yes I did forget to mention when snow or rain or wind blows branches into my grid I will get recordings, (big DUH) Just assumed we all knew what a motion grid was. I guess not " title="Applause" /> How can you guarantee something you know nothing about. You obviously are using the same systems and like to stick with it. Try other brands my friend you will see what I'm talking about.

Sure I get alerts when something passes into my grid of motion detection, i've picked up cats, dogs, birds. Never anything smaller. Not using email alerts at the moment but I can enable remotely in the event I do need them turned on.

False I have a camera mounted under my front door and overlooks my walkway, driveway and street. I ONLY get recordings when people walk up my driveway or front door walkway. Never since setting up my motion detect region to mask the street have I had emails or recordings sent from street motion. Maybe your just using the wrong equipment

Hello Is it always the same cameras going off? Have you tried cameras that don't shut off in spots of the cameras that do. How many POE switches are you using? is it always cameras on the same POE switch. Try a few things like swapping The ports on POE switch see if the issue follows to new port. Also what are you powering thePOE switch with? UPS installed?

Could be case sensitive issue, or low bandwidth and the cameras only response for issue is "invalid password" try power cycling the camera, or assigning it a new IP address

Would you be willing to supply a backed up file (something around 1-5mb) doesn't have to have video or anything just so I and anyone else can have some hands on with this. Thanks

Can we get a little more detail. How much area do they want to cover, is it just an overall shot they want to see or does anything need to be captured. I'm guessing no since you say it's going to be output on a TV and not recording. You can run a mic from inside the meeting room to the tv so audio can be heard without being muffled by 20meter travel. The camera and mic don't need to be mounted together to be heard together. Give us some more info, this should be very easy to accomplish

I was able to find this page http://idownload.ws/Webcam-Splitter/software.html What does the software do and can you post the model number of your webcam. Thanks

What make/model DVR do you have. It should have a Motion Detect or Recording type menu. In this menu you will have a 'region' or 'mask' button so you can unselect the street and other areas you don't want to trigger recordings.

Kind of a reason I think firmware should only be sent by the manufacturer or technical support for the manufacturer.

Your DVR should have a network menu. Find it, write down all th ports you see there, log into your router. If your not sure how to do this visit www.portforward.com find your router and follow the steps. Once your ports are forwRded to the IP of your DVR(PC) then goto www.canyouseeme.org enter in the ports one at a time they should show open, if they show open next part is easy goto www.ipchicken.com write down your IP address and try it from an outside network. Not your network, maybe connect to a neighbors wifi if possible or an aircard, Internet cafe etc. Open IE type in your IP address (from ip chicken) and should be able to log in from there forward. Let me know if you need more help or get stuck

Hello, I'm assuming you want to cover the front door/walkway instead of the street, correct. So motion on the doorway starts recording and not cars driving by. Am I right

I'd be interested in seeing a before and after picture of this one

They can support up to 32GB SD Cards. checked with manufacturer.

you're watching too much CSI my friend.

I hope your not leading this guy to believe he should use cat5 thats already ran throughout.. Very wise have a noob start stripping cat5 and connecting video baluns. I can hear the tech call coming in now, Well at least you're keeping me employed Run your own cable is my advice.

Haha Ok so I would actually leave the drive type as is. If IDE is standard on that board I would keep it so. If you have additional IDE slots on the board then I would definitely take advantage and use all HD bays. Theres usually no setup required and you get more days/weeks/months of recording.

I'm confused your last sentence says the other racks are for sata, but you asked if it's possible to add sata. .?? If you have sata slots on your board then yes use sat a drives if not then IDE is your only option. Unless it's a PC DVR with a capture card then you can use either one (with a converter connection)

no prob ... updated .... added an example tweaked skin viewtopic.php?f=3&t=23702&p=155404#p155404 Very neat. Think I'll try this on my pss I have about 20 tasks I use a lot.

Edit PSS_Config.ini [Version_Info] ...... DevMaxCount=50 ...... That's it. " title="Applause" />. Thanks for not making me.

It wasn't there. How to add in more than the allowed 50 max devices (DVRs,NVRs & IP cams)

It wasn't there. How to add in more than the allowed 50 max devices (DVRs,NVRs & IP cams)

Nice guide rory " title="Applause" /> I've tweaked mine. There is a feature I don't think you added though, I'll take another look, then let you know.

Hello again, while I will not recommend make/model. I can advise you to run rg59 and cat5 to all your cameras locations. You might say now you are not interested in having a camera that uses cat5 (rs485, ptz, etc.) but. I speak to people everyday that have no rs485 run and they just bought a really nice camera and I can zoom in with my iPad from and guess what now you have to run a new cable and it could have been done already to begin with. It's also very nice in case you want to hook up a microphone later on. You can use that cat5 without having to say, no mic cause I have run more cable. cat5 is soo cheap too. I think I paid my last box $30 for 500ft, so it's worth it.

You bet happy to help