indy

Nope I made sure everything is set to not go into sleep mode or hibernation. Power Management is fine. Thanks

Sniper di you finally have any luck getting your machine to work with the geovision? On another note I have a question, if anyone can help I would greatly appreciate it. The question is when I start to monitor all the cameras, after a couple of hours I get "video lost" , and obviously the recording stops. When I close and restart the geovision program I get the signal back from all my cams. Any ideas? Thank you.

Sniper and everyone thank you for the help, sorry for the late reply but I got both my syetems to work!!! YAY I just re-installed my video drivers and i got video!! SO YES AMD does work with Nforce 4 and pcie express with Radeon graphics. Im sorry you couldnt get yours to work sniper...

sniper, ty very much. I hope i could solve my problems because i just bought 2 new cards and 2 new computers, based on the above specs. Ill fiddle around some more with your given information and keep you up to date. In the meantime goodluck.

Thank you for the quick reply Rory. I know that the dirext x is up to date, but I will have to check the drivers for the video card to see that they are up to date. Thank you.

SNiper did you ever get a response? I just got the geovision card. My specs are similar to yours. Specs are ASUS A8N-E MOTHERBOARD ATX S939 NFORCE4 ULTRA DDR PCI-E16 MSI RX300HM-TD128E Radeon X300 SE 128MB DDR PCI-E AMD Athlon 64 3500+ Processor S939 Venice I get no video i tried playing around with ntsc and pal. Everything in device manager is fine. If anyone can help or know a workaround i would appreciate it. Thank you.