lampy

Many thanks shankarsha, was not aware of it existence, MCU_D, as you can login, shows a still image

MMmm.. good question, this 'm not shure, 'll get back on this one shaken but not stired, eventhough this means averdigi is not related to avermedia. still the questions remains: (how) can I get a DSS1000 (with Argus capturecards) pc based system working on an Iphone with DSS-Iviewer App installed from the Applestore? would this possible at all? correct: on Siemens S75 and Nokia Comunnicator but no streams, it would help me (even) with (non) releated hard/ software-settings it gives me an inside how systems are working or should be build ho ho my post is not finished the next issue would be: also installed a NV5000 (HP-TOWER) pc based system in a coctailbar, the url/ script/ http://xx.xx.xx.xx/mobile or /webcam shows 4 camera icons a page, yet (when selected) it shows only a picture in the (Siemens S75 or shop owners Nokia Communicator) browser. selected again the image refreshes this is even worse then the "Security Zone Mobile" application f.t.f, any ideas about the DSS-System on iPhone

tomcctv.. first of all, thanks your fast replys, it gives me a push that not 1 app is compatable with all dvrs/ nvrs I agree so I installed: -Eagleeye, (the Symbian version (.jad/ .jar)) for AVTech's dvr's working on their demopage links, but on my adresses I get "login error" or "DESCRIBE ERROR" -Security Zone Mobile, (trial version) for Axis ipcam works. but putting the url rtsp://.:1024/mpeg4/1/media.amp in the Samsung browser works better it popsup the mediaplayer, having no controls and the Axis needs to be configured: connect to everyone -Supervisor, tryed on all my devices "login procedure failed" -JAVA-Viewer, tryed all mentioned devices dvr's and nvr's, nothing happens (Connecting...) lets pick this one could be, the DSS1000 is indeed an Avermedia system so on the shop owners iPhone I installed from the Applestore: DSS iViewer By AverMedia & AVerDiGi iViewer By AverMedia, still, I can't get it to work more ports needs to be opened? I'm not sure if this is true when installing AVerDiGi PDAViewer by Avermedia it replys: content not supported but then again the Samsung is not a finished machine (birthday present, what can I say) Lampy

on several shops, bars and restaurants i placed some low-budget system like: note: all sytems mentioned below are accessable through browser or with their software DSS1000 pc-based DVR (forwarded port 88 & 5550) on Speedtouch modem AVERDIGI App on iPhone -> not working AVTech KPD616 standalone DVR (in DMZ) om Speedtouch 501i modem Eagleeye on Samsung -> not working rtsp://xx.xx.xx.xx/live/mpeg4 working in Quicktime rtsp://xx.xx.xx.xx/live/mpeg4 -> not working on Samsung replys: try again not sure if the string: /live/mpeg4 is the correct one for Samsung Hikvision DS-7204 HVI-S standalone DVR (in DMZ) on Sitecom wl 173 Eagleeye on Samsung -> not working in Quicktime and on Samsung the url: rtsp://xx.xx.xx.xx/stream.264 opens ports in streammediaserver but Quicktime replys: no content found and Samsung tells: connection lost not sure if the string: stream.264 is the correct one AVTech 796 standalone DVR (in DMZ) on Cisco modem Eagleeye on Samsung -> not working rtsp:// tested most common strings -> not working Axis M1101 Ipcam (forwarded port 82 & 1024) on Sitecom wl 173 Eagleeyes on Samsung -> not working Security Zone Manager on Samsung -> working but not a nice stream rtsp://xx.xx.xx.xx/1024/mpeg4/1/media.amp on Samsung -> working! I build more systems, but these mentioned so you get the picture more and more managers using smartphones therefore more often I get the question: I have an Iphone, HTC, Nokia or BlackBerry can I login? should be possible, Yeah, BUT HOW?

well.. let's setup this combination in order of apearence AVTech PCD-KPD616 16ch dvr 192.168.1.20 in DMZ on a Sweex RO001 switch lan 192.168.1.1 wan 83.56.xx.xx on a Spoofed Speedtouch 510i modem v internet v Samsung Jet GT-S8000 on wifi rtsp://83.56.xx.xx/live.mpeg4 is accessable with quicktime on other pc but not on the Samsung

hello all, I cannot imagen that I am the only one having difficulties setting up a stream server accessable for mobile phone (iPhone's, Adroid's and BlackBerry's) perhaps someone past a "reference" page while surfing internet? like to know what to put in adressbar, as rtsp://xxx.xxx.xxx.xxx/mpeg4/1/media.amp rtsp://username:password@xxx.xxx.xxx.xxx/mpeg4/media.amp rtsp://xxx.xxx.xxx.xxx/axis-media.cgi/mjpeg.cgi rtsp://xxx.xxx.xxx.xxx/live/mpeg4 rtsp://xxx.xxx.xxx.xxx/stream.264 HMHMHM ARGgg.. I'm lost why doesn't the manufacturer put the correct streamadress-strings in there manual including ports to trigger/ map/ forward all hints and suggestions are VERY WELCOME Greetings, Lampy

high there, although I could manage a lot just surfing cctforum, but I'm stuck, can anybody help me out with this, how do I: configure port's and which one or range on router-dvr's and ipcam's access my dvr's and ipcam's on mobile blackberry Samsung jet btw has samsung an android or symbian platform? hardware setup: modem: Cisco EPC3925, having 4 public ip's: modem prt 1: router: sitecom wl173 on wl173 prt 1: pc1 prt 2: pc2 prt 3: pc3 prt 4: pc4 modem prt 2: router: sitecom wl340 on wl340 prt 1: Axis M1011 prt: http: 82, 4444, rtsp: 1024 prt 2: DS-7204 HVI-S (HikVision) prt: 84, 8000, rtsp: ? (8000 is the redirected port when accessing through http or with the iVMS-4000 sftw prt 3: VME prt 4: SMS Server modem prt 3: KPSec dvr (KPD616?) prt: 86, rtsp: 554 (through trail & error & quicktime) modem prt 4: nc all ports above are forwarded in there ap's THE THING is: what to put in the adressbalk for whatever got these url's working rtsp://xx.xx.xx.xx:1024/mpeg4/1/media.amp =Axis M1011, in Quicktime, vlc & samsung s8000 (in Quicktime most of the time no video though) rtsp://xx.xx.xx.xx/live/mpeg4 = KPSec, only in Quicktime, & vlc but I cannot acces: DS-7204 HVI-S dont know the string, port to forward (if they fail) by Quictime, Vlc or mobile rtsp://xx.xx.xx.xx.84, 554& 8000 by Quictime, Vlc or mobile KPSec dont know the string, port to forward by mobile app's on mobile: JAVA-Viewer Security Zone Manager (trial version) EagleEyes (Symbian) (with EagleEyes I can connect devellopers demo dvr & Ipcam system's, so it works and tells me I or I have my configuration wrong, not complete or I use the wrong strings or my hardware is not supported) I'll be greatfull if someone, anyone, anywhere could HELP ME OUT! Lampy

high there, although I could manage a lot just surfing cctforum, but I'm stuck, can anybody help me out with this, how do I: configure port's and which one or range on router-dvr's and ipcam's access my dvr's and ipcam's on mobile blackberry Samsung jet btw has samsung an android or symbian platform? hardware setup: modem: Cisco EPC3925, having 4 public ip's: prt 1: router: sitecom wl173 prt 1: pc1 prt 2: pc2 prt 3: pc3 prt 4: pc4 prt 2: router: sitecom 150n prt 1: Axis M1011 prt: http: 82, 4444, rtsp: 1024 prt 2: DS-7204 HVI-S (HikVision) prt: 84, 8000, rtsp: ? (8000 is the redirected port when accessing through http or with the iVMS-4000 sftw prt 3: VME prt 4: SMS Server prt 3: KPSec dvr (KPD616?) prt: 86, rtsp: 554 (through trail & error & quicktime) all these ports are forwarded THE THING is: what to put in the adressbalk for whatever got these url's working rtsp://xx.xx.xx.xx:1024/mpeg4/1/media.amp =Axis M1011, in Quicktime, vlc & samsung s8000 (in Quicktime most of the time no video though) rtsp://xx.xx.xx.xx/live/mpeg4 = KPSec, only in Quicktime, & vlc but I cannot acces: DS-7204 HVI-S dont know the string, port to forward (if they fail) by Quictime, Vlc or mobile rtsp://xx.xx.xx.xx.84, 554& 8000 by Quictime, Vlc or mobile KPSec dont know the string, port to forward by mobile app's on mobile: JAVA-Viewer Security Zone Manager (trial version) EagleEyes (Symbian) (with EagleEyes I can connect devellopers demo dvr & Ipcam system's, so it works and tells me I or I have my configuration wrong, not complete or I use the wrong strings or my hardware is not supported) I'll be greatfull if someone, anyone, anywhere could HELP ME OUT! Lampy