hopper

Is this possible, I have a problem here where the installer has ran RG59 back to the DVr, my problem is I need to be able to controll the menu also. Can you run the video and data down the one cable, I heard it is possible using a Y splitter, but not sure.

If IE6 works so should IE7 both can use ActiceX, just make sure you turn on ActiveX ?

It might be that the DVR is looking to install Active X, as of yet Firefox does not allow this, if you are using Windows Vista, then you have to run IE as an Administrator to allow ActiveX to install. hope this helps. PS. have you checked port forwarding in the Router

Can someone explain the difference between Pelco-D, Pelco-D1 and Pelco-P, Thanks

Have been using the Netopia for quite some time now over the internet without any problems, two things 1. make sure you also set the firewall to low 2. if you need to setup a dynamic IP then you will have to telnet into the Router to do this.

Hi cachecreekcctv to sort your problem with windows vista is to right click on internet explorer and run as anministrator then install active x this works 100% all the time and only needed to be done once.

Anyone got any ideas on this, my DVR has BNC which i want to run to a VGA computer monitor, i know i can run a vga lead but its quite thick to run along the wall, is there a type of lead to convert this or a box type gadget.

At present have a customer on the phone about the length of his run to the camera, he has run 3 driffrent types of cable rg59, rg100, and cat5e, at present he is using the rg59 cable connected to icrealtime dvr to icr1000 camera, running over 720 feet, he has a picture but its blur he is telling me, its fixed 17 feet high looking over a yard, not sure to to make this picture better, any ideas, on this, do i need to change to the cat5e and use the balluns, or what, also he is having problems trying to connect a bnc plug to the rg100 cable.

Not sure where to post this, so let me explain. I have a flex 16way pro DVR from ICREALTIME, my problem is that one of my customers want to be able to link this DVR to this Till system, i have heard of this been done, but never tried it, would not know where to start, can someone give me some info on this till scan thing, and what i would need to make it work, by the way the tills are all pc based and connected to broadband if this helps. thanx

can some one tell me where the 22z should go indoor / outdoor / lane way or what.

CIF resolution recording (352x240) and the Mpeg4 compression is this hardware or software related, can a firmware update the cif to cif2 or increase the resolution, really the playback quility is crap, there must be something i'm doing wrong, anyone else agree with what i am saying or better have a solution. its bad enough trying to pin point someone moving from camera to camera without having the problem of trying to makeout who it is.

what about the ide cable 33 or 66 i'm sure mace use 33 does this make a driffrents. ?

we are using 7200rpm maxtor drives in our dvr's, one think it that the ide cables are 33 and not 66 udma's does this slow down the speed of the hard drive, not sure if i am making sense on this one

is there anyway to fix this quility playback problem

the dvr's i have at present are the dvr0414 dvr800 dvr1600 all mace, have been trying to ring them for a while now to find out if there were any updates for these dvr, i find playback quility is not very good even at 25fps the screen is not very clear. Also one big problem i have is when you are playing back and you change to another camera the time either jumps backwards or forwards to driffrent times, and its never the same seconds, its very hard to follow someone through a door way when the time jumps we lose sight of the person. this is a real draw back with this dvr.