Rock

Hi, Our Jooan 4 cam NVR HD 3MP just stopped working. It has been fine but not now. I have opened it up and the little green light on the mobo works when I plug it in, so the power is getting to it. The battery should be okay as it is only 8 months new. Any ideas please? Is there a way to test ? Thanks oz

Hi, I have 8 cams on this DVR and now one of the cams is flashing white (like a flashlight) with the Setup Menu data showing. Of this Menu data. The highlite bar is going up and down the list . Lens, Exposure,White bal etc at a quick rate. Through the menu it still shows the view fine. How can I stop this? [sOLVED] Cleaned connections to cam even though they looked solid and it came good

Thanks, I'll check out the connections. oz

Hi, I would like these images from motion to be seen in the email inline when I open it up as opposed to having to open the attachment in a program. I use Thunderbird v31 and it shows as an attachment, not inline. Any ideas how I can have this show when I open the email, or change the way it is sent by the Zmodo DVR. They cannot be opened in my Galaxy S4 with the Zviewer either. Thanks oz Content-Type: image/octet-stream Content-Disposition: attachment; filename="1-1015.jpg"

I use port 85. Have you got the three IP's in your port forwarding/virtual in the modem? You need all three.

Hi, Every now and then the very top of one cam frame on my DVR, shakes. What could cause this please? Thanks

Hi again Dennis, Well I have it working now on my mobile devices via the web, still not in the area where the router is, however out of range from it. It seems like it was two things as I can't see anything else that changed. I contacted the retailer who directed me to a video on their site. It said to enter 98 to 101 in the router forwarder not the default 100. I did that too. Then it said the download another free app This one called KMEYE. There are a few with a similar name but it had to be exactly this spelling. It does work with up to 16 cams but only shows one at a time. It is really good and works with iPad and iPhone. Anyway I did that.. and it hasn't stop working on demand ever since so, maybe the port changes from 98 to 101 or maybe none of the free apps worked with my DVR except this one. Anyway.. done ! Many thanks for the help. oz

Hi, Well as an update.. I do have it working on the LAN 192.168 etc and sometimes on the web. 123.243 etc It seems that it does ONLY work with Active X so I am stuck with IE. I noticed that the DVR login did not come nup and it was just blank until one day a 'Save' panel came up with the unsigned script from Shenshem Giec Electronics. It was DVROCX_CAB. Once that was saved and run I am able to get to the web although it does not worl all the time. It is quite frustrating because when i want it to work on demand it doesn't. Not sure why that would be as nit does work sometimes, but obnly with IE. The mobile to phone and iPad is another thing. I have the port as default as 100. Also sometimes this works and sometimes it doesn't. Then when it does I only get 4 of the 8 cams. Would like as explanation for the if anyone knows. Thanks

I'm not sure.. I'll have a look at that. I did find in the set up disc a doc file which said there is an App for ipad and iphone called Meye. I got it down (free) and put it on both however I was not able to see anything. This would be using WiFi. I still can get it okay though on another PC, so the data is correct for the web in the DVR. There is a Mobile Phone area whcih offer a 3G option and a port with 0100 as the default. I am not sure what that port is for my carrier so I guess will have to check that out. Thanks again will be back tomorrow no doubt.. Off to bed for me now ..

Thank you for your time. Just as your message came in I got it to work with IE. It seems it needs Activex. I changed the Web port to a weird number in the DVR and once I entered it in IE, a panel came up from the mfg of the program. I downloaded it and whammo a login came on and I was in. I of course used the IP 123.243.xxx.xx:weird number. Only thing is now I can't get it to work with FF ( I use the most) and the iPad (Safari) I do appreciate your help. Thanks

Hi, Shoutcast is a audio streaming program or script which many radio stations use to stream their music. That's what we use it for as well. I get 123.243.xxx.xxx at that address. It is correct as I have it. There doesn't seem to be any other area in the DVR menu which also allow for an internet IP as well as the LAN which is now working as I have set it up above. Not sure which one to change in the dvr menu so I can use the web ip of 123. etc. Thanks again Thanks

Okay Many thanks. OI have it working on the LAN now but not on the web The Network setup on the DVR is TYPE STATIC MEDIA PORT 09000 This is DVR default WEB PORT 00080 This is DVR default DNS 192.168.001.001 IP ADDR 192.168.001.013 SUB 255.255.255.000 GATEWAY 192.168.001.001 UPNP ON DDNS Settings are all blank The Mobile Area says Mobile network 3G This is DVR default Mobile Port 00100 This is DVR default In the router the virtual server or port forward already has a 80 but I have not set one for the 9000. The static address of the router is xxx.xxx.xxx.xxx That address with works fine at :8000 for my shoutcast Thanks

Hi, I have a NBN304 router ADSL (TPG) with the gateway 192.168.1.1 and LAN from 192.168.1.2 I have a static Internet address and 2 PC on the LAN with fixed IPs and a Samsung TV wireless. They all work fine. Now I just bought a 8 cam DVR for security and I am trying to set it up to send images to the net. The manual leaves a lot to be desired and it is hard to make head nor tail of it. I can get into the DVR directly to it's setup program but i am not sure what to enter in the network and mobile option fields. I have it set at.. TYPE DHCP MEDIA PORT 0900 This is DVR default WEB PORT 00080 This is DVR default DNS 192.168.001.001 IP ADDR 192.168.001.013 AUTO DNS 192.168.001.001 UPNP ON DDNS Settings are all blank The Mobile Area says Mobile network 3G This is DVR default Mobiole Port 00100 This is DVR default I am with Telstra Mobile Where am I going wrong please? oz

Hi, Does anyone know any good software that will work with the 4 multi card Pico card which is the topic of conversation throughout the forums. I too bought some and now need good s/w. Rock

Hi, I have an old JVC Nivico TK60 tv security camera with it's own monitor and it works fine coupled together even though my cable is about 60 metres. I want to know if and how I can use the camera with a security video capture card in my computer. I also have some small cams but would like to use this as well if I can. Any ideas? Rock