Go3Team

If it's who I think it is, I've already looked at the Qvis on their site, so I may have to send some $ their way.

I got it off of Ebay, a US seller, but probably still some Chinese stuff. I bought 4 more over the weekend, and am waiting for them to arrive so I can set them up. They were advertised as 10m, but the shed to the left are probably twice that, and still getting lit up.

That looks good too, what "brands" should I be looking for?

The DH-DVR0804HF-S or DH-DVR0804HF-A look decent, too bad Google doesn't bring up any US vendors. Any thoughts on either of those?

I have my VCM-24VF set up and happen to have a couple of photos handy: Flood lights: IR Lighting: With no lighting at all is pretty amazing, I just don't have a photo handy.

Is the 2wire a routing device? What about the Cisco? You can't have one router behind another, causes hell with NAT.

I'm trying to find some proper power wire hopefully red and black to mark polarity, and hopefully jacketed. I've picked up some 22/2 today at one of the big box stores, but it just doesn't look thick enough. I'm probably thinking 18/2, but all the lengths I've seen are 1000' and I only need about a tenth of that. Should I go with the 22 gauge I bought or look around for some 18/2 by the foot? Thanks.

That's why I was looking @ 18/2, so I could also use it for that as well. Does anyone have a spare 100' to 150' they might want to sell?

I'm running 20 WD Black 1TB in RAID6 for a video server. It's a software RAID - MDADM. It's worked great for me, although, from what I understand, that depending on the type of RAID (software or hardware) you might have a problem with TLER (http://en.wikipedia.org/wiki/Time-Limited_Error_Recovery) that the non RE drives dont have. Check the reviews on for more info on the drive you eventually pick.

Can these be paired with a IR Illuminator for really dark places? Also a general question about baluns, is there any signal degradation using these? I have plenty of CAT6 lying around, just no coax. Thanks

Can someone recommend a reputable authorized dealer for the CNB, and/or baluns? Or would that be against the rules?

Thanks for the info.

Hopefully someone here can help. I just bought a couple of cheap IP Cams to view the goings on in my back yard. They are both Foscam FI8905W cameras with built in illumination. I just received the 2nd one today, replaced the lens with a 4mm lens, and installed it. I took done the other, replaced the 6mm lens in that with another 4mm lens. Currently the only difference between the 2 is where the lenses came from. 1 came from Hong Kong the other from Singapore. Performance wise, the camera I got today has great illumination whereas the other one I have (which is about a month old) focuses the IR on a focused area. Here are some pics for reference: Good illumination: Focused illumination: The top photo does have some vignetting which I still need to diagnose, and the bottom photo still needs to be fine tuned on the focus. Looking at some IR Illuminators on Ebay - I have seen where they include a spec for angle like: Angle: 30 / 60 / 80. I had both of these cameras apart today, and saw nothing that would be something for adjusting angle. Looking at the photos of the illuminators on Ebay also show nothing that stands out as adjusting. Is there something I'm missing? Hopefully someone here can point me in the right direction before spending a few bucks on a external illuminator. Thanks.

With the original lens - on the camera with the focused IR, it filled the frame. Since I have a wider angle lens, it has a focused effect. The 2 cameras were bought from the same place just at different times. Same model, same everthing. The IR spread is the same as it was when I got it. Here's a picture from the 2nd camera with a 6mm lens: I read on another forum that people mentioned using wax paper to disperse the light more. I figured what the heck, and gave it a try. It helped a bit, but still had a highly focused area. They are soldered in there pretty good, hardly budging at all.