webmanny

Birdman, I really appreciate your help so far, I saw those connectors you circled, but those pins are just the heads of the connector on the other side going to the camera and if I attempt to solder wires directly there, I will effectively bypass the whole control board and it will not function. Based on everything I've found online, the correct way of connecting it is through the blue connector, which originally comes with the camera when it is sold new, but I can't find it and I don't know what that connector type is. If someone here knows what this blue plug is called, as far as the technical term for it, I may be able to follow your suggestions, but to the blue plug rather than directly to the camera. I have provided some pictured of the underside of those pins you mentioned before for sharing knowledge. Also, I have taken a better picture of those pins from the side. I thank you again for your effort, I really do, but that option will not work for this scenario. By the way, I also tried pulling the blue plug to see if there are pins under it, but it does not come out. Thanks, Manny

Good day to all, I recently purchased this camera from eBay and it looks like new. I have a ZModo 8 ch DVR system with the RS-485 connection and right now it has 6 cameras and I wanted to install this new camera to it. The problem is, it didn't come with any cables and I'm not familiar at all with the connections for it. Is there a way that anybody here can help me? I already have the power and video cable running to the location where I want to install it, but I'm sure I need one more cable to make it work. I just don't know which. I have attached a few pictures of the bottom of the PTZ camera for you to check out. Thank you very much in advance for your help. Manny