lemike41

i ask about WDR because if you turn on the WDR low light result is worst (it was on in the uploaded image)

can't say for your situation, not sure it will work correctly, this cam has some strange behaviour with fixed shutter, mine is installed on a very bright area, and the sun shine directly on the camera too (backlight compensaton is great i have to say...) watercolor effect is common with H264 in low light in general ... go for a p3364 if you can add some white light you won't be disapointed do you need WDR?

So you are saying that in night mode you can't set the shutter speed to something like 1/100? yes unless you use a fixed shutter of 1/100 for day & night = exposure problem when scene is too bright during day When you say that the IR results are not exceptional, may I ask what you are comparing against and is there something that you would consider exceptional (box preferred, but can live with dome)? They are sold for super low light cams but they are not unless you use a slow shutter and a lot of gain (noisy image...+noise reduction effect that can't be managed) also if you turn on WDR image is worst in low light i have exceptional result with my old bosch ltc0620 analog cam (i'm always in color mode), ok it's an analog cam... i have similar result to the p3364 with my Mobotix if i use the same 1/30 shutter mode + IR, (but as i like crisp images my mobotix use a 1/250 shutter so every cam has a 150w PIR flood light over) ...

white light in back ground is a 70w spot

1/30sec shutter / gain : 12db Ir light + white light in the back ground

Hello i don't have LVE but VE without integrated ir, i have a raytec fusion rm50 over the cam http://www.axis.com/products/cam_p3364ve/ i'm sorry but i can't post any sample unless i blur half of the image

for sale: m24 sec night 90° lens d12 sec night 90° lens d12 it day 90° lens (average dome cover condition) M12 sec L43 dual imager (45°) axis q1604 + original lens bosch nbc 255 + original lens all are in very good conditions, used only for demo purposes PM me if intrested

Hello i still have this for sale: iqeye IQ761NI v16 in very good conditions, used only for demo purposes PM me if intrested

p-3364-ve is available since June in Europe

Q1604 & P3364 are correct if you have a decent amount of white light, the color mode is great but if you use IR results are not exceptional i have one p3364 outdor and a q1604 indoor -at night i have a lot of motion blur (max shutter can't be set above 1/30sec) - it seems that on axis cameras their is an anti noise effect that can't be removed or reduced at night, -if you want a crystal clear image you have to set a very slow shutter speed like 1/1sec

if you had an avigilon pro 16MP you could have catched the face perfectly @ 0.05sec on the video, you could have catched the serial number of the bike wheel , can't you put 8000$ on a camera? some clues: your cam is too high (use an anti vandal dome and place it lower) your resolution is too low (use megapixel cam) your angle is too wide for this low resolution (your pixel per foot is too low for facial recognition) your recording codec is not the best for cctv (use Mobotix Mxpeg or Avigilon Jpeg2000 if you want the best detail)

i use milestone Xpress on this entreprise level instalation hyperthreading is supported by milestone smart client so you take full advantage of the I7 3770 i would not recommand to OC an enterprise server, if you don't have correct voltages issues could appear, it's not like having more fps on a game...then a crash during a party... just imagine that the recording service freeze due to a bad OC... i preefer to put an extra $100 on the more advanced cpu and run it at stock, the frequency is not the key to more performances, be sure to have good memory, strong & fast hard drive correctly cooled and a decent graphic card

According to your last statment.... It seems like system with i7 CPU is capable of handing 25-30 channels of real time video monitoring and recording with hitting Maximum CPU usage. But then it depends on what kind of resolution of decoding and encoding the system is doing. Thanks. the latest i7 are killers my cpu usage is approx 25% while viewing & recording, and approx 10% while recording only, i have 3 monitors, 1 for the desktop, 1 with 6 cams (6 x 1.3mp) and 1 with 12 cams (7 x D1 and 5 x 1.3MP) i can't reach 100% even if i fast review all my cams

if you want to speed up your milestone system and if you dont care about noise but want better perf : use a dedicated disk for recording (i recommand a 250Go velociraptor) and another dedicated disk for archieving (like a caviar black) i have this kind of setup for 16 x D1 cam and 11 x 1.3MP cam on an i7 3770 + 8go of ram, it runs like a charm even if i fast reveiw all cams simultanously

too good to be true i except a high ghost effect due to a slow shutter speed even the best Ip HD cam can't suplly such picture without ghosting effect

Hello anyone got Xprotect mobile 1.0a installer? the one available on milestone webstie (1.1a) doesn't work with win 7 pro 64bits (Milestone support know that the instaler is buggy) any help would be appreciated

i finaly called milestone and they pointed me to a regedit tweak that worked, in case it could help, run this file prior to instalation: http://download.milestonesys.com/Solution_00000564.zip then run the 1.1a instaler and it should work fine

for sale on ebay: http://www.ebay.com/itm/camera-ip-iqeye-IQ761NI-V16-/280884993465

more picture/info about S14 here: http://ipvideo.ru/index.php/2009-12-30-12-19-54/154--vip-mobotix-vip-ipc-mobotix-fall-2011

have a lokk at this article: http://www.arnnet.com.au/article/415445/mobotix_npc_2012_part_2_products_roadmap_showcase_incl_slideshow_/

from what i heard , no M14 before q2 or q3 2012 mobotix is working on a covert model, project code S14 (S for Slim) :

Hello i'm tired about MxCC and it's constant bugs i need a VMS software that could manage correctly Mobotix cameras : Mxpeg support audio support a good search method like MxCC 2.5 pre-saved sequences quick search i tried milestone pros : good bandwith management audio support mxpeg support cons: no event search list within a defined time interval weird export using non database format no direct picture export (like a right click on picture > save snapshot) problems with the new sequence record search (with mobotix cams, one sequence is generated every 1.5 sec whereas it works fine with my axis q241 encoder) i also tried avigilon but i have other problems: pros : cool event search and timeline search simple and efficient layout motion detection is based on the camera internal motion detection system cons : no audio support weird bandwith management (8Mb/sec for my 5 mobotix cams whereas Milestone used only 2.5mb/sec) do you another recording VMS that could suite my needs?

Hello anyone tried Bosch HD cams (NBN‑832) ? i was happy with my ltc 0495, i wonder about those HD cams.... how could it be compared (in term of image quality and details when you zoom, night sensistivity) to Mobotix or Sony SNC cams? i tried sony snc ch280 and i was not impressed by the image quality (not taliking about WDR), but the post processing on the sensor makes me feel that the details on the frame where not as good as on the mobotix, pixels tends to be blured even in MJpeg mode any feedback would be appreciated regards Michael

Hello i currrently use ltc 0495 to catch licence plates at night (no APRN soft behind, i just need to read a plate if needed), i use AES and a default shutter speed of 1/500 + an extra IR, the cam always use a shutter speed beetween 1/500 and 1/10000. i need to add a more discret system again to catch licence plates (it will catch plates on public street), i wonder about the dome version, the ndn 0498 flexidome 2X is the dome version as good as the box version? can i use the same AES system with a shutter speed always above 1/500 on the dome? it seems that on the dome the shutter will automaticly use longer exposition time to maintain a correct overall lighting, can someone confirm this? also do you think the ip 720p version would suite my needs too (ndn 921), is it enough sensitive for this application?