mazonvision

you should also check the cable, sometimes you need to disconnect the connector from the cable and clean it up a little bit. I have this experience and it helped to improve the picture, no more static. http://www.mazonvision.com

if you need it for DVR security system, i suggest you to pay a little bit to set it up. You can set up few static IP addresses thru several service provider like the dslextreme. They are pretty relaible. Good luck. http://www.mazonvision.com

Thanks for sharing.. now i know the difference.

the company has to pay the engineers to make improvement on their software as well. I agree that Geovision collect a small fees for the upgrade after certain period. http://www.mazonvision.com

what would you like to share? or you need some information on CCTV? http://www.mazonvision.com

yup, i have been using that site for a long time. A lot of information. Good luck and enjoy. http://www.mazonvision.com

i have been using the Maxtor for a long time. I like it, it's reliable. I have been using Maxtor hard drive in my DVR system. I prefer using 7200rpm since it can retrieve data faster. That's what we need in playback multi channels. http://www.mazonvision.com

as far as i know most DVR card is best compatible with XP SP2. Try to install XP, it should work fine.

i doubt will any DVR system support Treo650.

i dun think that is a adjustable for the angle. http://www.mazonvision.com

I have 420TVL 12LEDS and 36LEDS Infrared camera which is perfect for bar since it doesn't require any light at all to capture the images. Let me know if you are interested. http://www.mazonvision.com

hi, i would suggest you to use the IR camera. With Sony lens, 420 TVL 36LEDS, that would be clear enough for you to see the whole warehouse day/night. http://www.mazonvision.com

i have been avoiding to use any linksys product. Their quality has been going down for some reasons. Especially on the wireless connection. If you would like to remotely view the DVR, i would suggest you to drop that router. http://www.mazonvision.com

[stop pimping your product. -Thomas]

i think that's the bnc wiring problem. I had that kind of situation before. After i change the cable and tighten it up, it works just fine(assuming your camera is in perfect condition).

hey guys, i will be there. Look for mazonvision. Hope to see some of you there. ciao

i would say the ADSL is a better choice. http://mazonvision.com

i think COP and Hikvision is doing a pretty decent job even most of their product from China. Everybody wants to cut down their cost. Not bad for budget customers. http://www.mazonvision.com

would strongly recommend Win XP SP2. [see my note about slack. -Thomas]

we did go there... great show... http://www.mazonvision.com.

i agree with spyman99... more LED will probably solve this problem.

we will be there... totally ready for this year....[see my notes about cutting you slack. -Thomas].

[Out of bounds of good taste. One post is fine. Two posts is rude spamming. I generally aim for cold distain but I consider this to be delibrate rudeness. If you wish to join the community then please do so. But note that any normal slack I would give in circumstances like this is gone. -Thomas, Moderator]

[Deleted. -Thomas]