ben_indo

hi Rapid, Thanks for your info btw, do you know the reason behind why STP (with individual pair foil wrap) type not working ? I find that most literatures are not recommend shielded pair for CCTV application, I just don't know why, any idea ?, anyone ? Ben

js Did you select correct video resolution; the audio function only works at lower resolution. Ben

few things you can check and do; 1. try update the directx to the current latest version 9.c, it may improve 2. if the distorted blur was caused by the interlacing issue, try to enable the de-interlace rencering, see whether it can improve. Ben

Dear all; We need to install CCTV camera with conditions as the following; 1. The camera are facing to manufacturing lines that installed with fluorescent lamps. 2. After working hours the whole production floor will be zero lux. problems; 1. At first we install IR Cameras (those models that come with built in IR ed Illuminators), it will flickering non stop due to strong lighting from the fluorescent lamps, I believe it is due to the electronic iris circuitry working nonstop to compensate the brightness, and the flickerings getting worsen when we see it through DVR, but after office hours the camera will work well no problem. 2. We replace all the IR Cameras with Low light CCTV camera and coupled them with standard manual iris lens, fix the iris, turn off the electronic iris function and the flickering were gone but the camera see almost nothing after working hours. Kindly give your recommendation, what type of cameras we shall chose, to enable camera to see at both situation. Ben

Dear forum; I have just installed GV8.0 on my 1240-16 system, I have noticed it use up up to 96% of CPU resources when the webcam being accessed (Multicam at highest resolution 720x576 interlaced), and around 40% with webcam off Is it normal ? the system is running on a P4 3.0GHz HT RAM 510MB on intel 915 chipset board. Please advise Thanks Ben_Indo