AndyA

Hello You don't need Dvr Card for Ip camera you do need pc to rescord unless you are go to record to a sd card that a lot geovision ip camera Have

works fine for me http://www.geovision.com.tw/upload/en/GV-Video_server-firmware/DMMultiView_1211.zip

The Cable pin out is in the user Guide http://www.samsungsv.com/Download/SDE-5001_User_Manual.pdf

I always use one website no issues http://www.geovision.com.tw/english/5_5.asp dmm multiviewer download

I don't know about that dvr but I would say alignment issue with drive so it push the button all the time also was it ide or sate cd rom it look custom driver but if was ide you might want to check jumpers

HI what Hughes platform you on new gen 4 stuff? what modem ht 1000 we are install for Canada Version of that That setup but it does not have static ip address yet

Would recommend Cheap video card we have few geovision system out they all have video card and when every we specs out stuff Geovison Distributor in Canada Always say use a video card not onboard

HI I have run cat 5 cable it run 475 feet Yes I know out spec for Cat5 Cable Distance but it has been run for 6 Months until now run geovision BL120 camera that suddenly stopped work on dlink des-1228p poe switch Changed Cable end and started work fine for 2 days then stop again haven't changed end again but was curios if any one is running any poe camera at extreme distance? they a second geovision camera run 500 feet run Again out specs but it work rock solid The Cable will pass data to laptop it works fine

Hi We had few old cliton camera i think not sure of model off the of my head they work fine few year normal bnc camera nothing super fancy we end up replace them for ip camera but they was nothing wrong they camera just of course was old technologies

Hi Out of Curiosity how are you power the Camera 12 volt or 24 volt or poe ? I would suggest take it open slide inside out take volt meter to contacts for power

Hello what the issues with camera? Maybe try one they deal they might help you fee or have you try called geovison direct I have had no issues with authoized deal in canada you might try ask deal if you by new camera to replace it they help you out on get other one warrenty I get my camera from local deal in canada all can say they services for warrenty has be excently http://www.geovision.com.tw/english/7_0.asp Did you by camera online by chance with credit card maybe you could try going after that way?

Hi Just thoght i point out it does work on windows 7 64 Not sure what up with your windows 7 64 bit install but the client does work on work windows 7 64 bit I have it on more the one 64 bit workstations You can download it on geovison sites both the Remote Log View and DmmMultiviewer http://www.geovision.com.tw/upload/en/GV-Video_server-firmware/DMMultiView_1205.zip http://www.geovision.com.tw/upload/en/GV-Video_server-firmware/RemoteViewlog_1205.zip

Cleared

Does the file copy with out error to other machine network just does'nt play cause if that cause you could be missing codec are your camera record in avi or they doing h26.4 if so they is a player in geovsion folder for play them back also a repair tool for avi

Have you try burn the footage useing view and then play back on diffent computer ? Maybe video card issues also you could try play the clip outside geovison if you have codec install it shound be under the cam folder under you geovison install folder

Hi is any one use the geovison camera ingrate with touch screen does geovison have url to control them like axis? I have't yet play with the ptz by geovision was just wonder if any one knew I been mean ask geovison sale guys about sdk any one here used it? Andy Thanks

Hi Has any one had chance to test skype intergration?

all you need is chunk of bnc to test the camera and bnc to rca adapter and tv with video input i suggested start they

I would start by go to camera trace the bnc off camera back to wear they meet or problay where old dvr was what is on back camera they cound be baulns bnc to cat 5 that of course would need cat 5 back to bnc at other end

If it's a Windows-base DVR, you can install the UPS software that will monitor the UPS status and initiate a proper shutdown automatically when the power gets low. The idea was a standalone Linux based DVR, running without monitor. There will be power outages, and they will drain the battery completely and there will be noone around to reset it. So .. I'll be wanting somehting with BIOS wake ... wake-on-lan or something. I'm fairly handy with Linux, so as long as it will wake up and connect to the internet I am happy entering the system myself by SSH and fixing anything by hand. So either wake-on-lan or some BIOS setting. Though maybe I might have to build a system myself rather than buy a standalone (later I'll maybe ask you all for opinions on the models available here to see if you have experiences) Cheers they wake on ac resume on most stander bios

Its 32 Camera yes you can do 32 ip camera

Hello Just wonder how many you do professional install hold a security Licensing? It Seem like Grab for Cash Just was curios how you felt about them? http://www.pssg.gov.bc.ca/securityindustry/business/terms-fees-payment.htm

Soundy I think if your work for company I think they might have it needed even for cctv I'am asume you work for some else maybe they hold one but they employies need to be registerd appently and hold one too I'am think say hell wish it keep do what I"Am do just wonder how you all felt or you had ones I'am guess that no

Did you see the http://www.pssg.gov.bc.ca/securityindustry/require-licence/index.htm Closed Circuit Television Installer Provides a service of selling, supplying, providing advice on, servicing or installing any closed circuit television equipment, device or system. So acord to what I read if you install or deal with anything cctv related you need to have one

I be in Vancouver tommorw So I asume you hold secuirty lincse ? did involed background check or not?