lincon2001

I have a printer but it don't have function print server so how to use it for Lan if I seperate my network by VLAN. My printer is connected directly to a computer in room1 Diagram: Computer's room1 + Printer: 192.168.1.x/255 Computer's room2 : 192.168.2.x/255 Computer'room3 : 192.168.3.x/255 I just want to use the printer for all room. Please help me configure details Thank and best regards, lincon2001.

If your DVR have this function, you can reach it in Record option.

Recently, I bought a DVR Fuho 16 port and ten camera. I connect it to the network. On DVR, I assign address 192.168.1.10 with port 81. On router, I used the port forwarding function to open port 81 and used DDNS function to assign address windyhotel.dyndns.org to my DVR. After I did that, I accessed it through LAN network at 192.168.1.10:81 the webpage authority appear I use password default: USER: admin Password: admin and then I can access the DVR. I do the same way via www.windyhotel.dyndns.org:81 the webpage authority appear and I use the same user and password but it not working. The popup appear and says: "Login Fail". I'm very confused and hope you all help me to resolve this problem. Thanks and best regards Lincon2001

EX: Ip Wan: 118.71.131.110 Ip LAN: 192.168.1.1 Ip DVR: 192.168.1.10 If you had only one device need to go out Internet, I think you could used the DMZ function on router (fill 192.168.1.10 into the blank) and on DVR you set the port http: 80. It's really simple to do. And now you could access your camera Via LAN you access: http://192.168.1.10 Via internet http://{your static ip} If you don't know your ip you should access http://www.myipaddress.com/show-my-ip-address/