puremobi

Four PTZ cameras.There is a special requirement when we zoom to a particular person,the audio sensitivity should increase to that person.please give your suggestions if this is possible and a good brand.. the client has no issues with money.

Hello, Can I use HP 1910 for the Edge Switches POE. Cheaper than HP 2910. Thanks Samuel

Hi Hardwired, Thank you and appreciate your response, Like you had mentioned I would not be requiring high POE, also in one of the recent projects we had executed for 700 cameras with 2610 switch,at the control room monitors, the view was pixelated, Hence we switched from 2610 to 2910. Also i noticed that 2610 has only 12.6 Gbps switching backplane compared to 1910 which has 56 Gbps, For a presales point of view, 2910 is expensive compared to 1910 ; Could you please give me some hint on the considerations that have to be taken care for the networking, I see that the networking team blindly propose 2610 as standard for all CCTV applications, I have attached the storage and bandwidth estimation using JVSG software, it is around 910 Mbps, at what point is 10Gbps required? Thanks, Samuel