andy jinks

FM modulator? Either it's not an FM modulator or it never worked. What's the cabling like? Could be inteference, duff connection somewhere. Try the camera plugged into the modulator directly to check it's not equipment at fault.

Hi, Currently we are using DA397 and DA665/8 (12V, 0.5A, 8 ports, Dantech from Gardiner Security). It is a very good product. However, we have a number of incidents where the fuses were blown and we had to send expensive engineer down to just change 1 fuse. We are wondering if there is a more customer friendly power supply out there. We are looking for these additional features, - A separate compartment where the customer can have easy access to them (without have to unscrew and next to the live wires) - Individual led light for each of the 8 output, and ideally can be seen by the customer from the outside without opening the box. - 12V regulated power. - It does not have to be wheather-proof, as we only use it in indoor environment. Any help would be very very much appreciated. Many thanks, Edward

Well I'm new to this forum and was wondering how I could learn how to become an installer of CCTV security systems (for homes and small businesses for starters). If anyone could point to the right direction I would greatly appreciate it. Please reply to cienfugos@addressisp.com

Can anyone tell me how to install a cctv system. There is a guide on here for alarms but i cant find one for cctv. Is there a site that i should be taking a look at.Any help would be greatly apreciated.