gaz1

heres another suggestion that you may not think of use surround sound speakers that you can fasten high up but on one speaker take out the speaker drill a hole the size of the camera been used and insert it into the hole with black fronted speakers it looks like a tweeter speaker so most ignore it the house is marked as an easy target the fact its been done twice is more like the robbers comming back for replaced items from the insurance claim also anyone entering from the street will not cover up as it causes too much interest it may be worth considering some street path way cameras to catch the faces of the intruders

it does say 12 port s1 stuck on one of the chips of the geovision card it does have 2 serial cables at the plug ends at back of the card 1 black 1 blue cables there is no other passwords to the system except admin as its a brand new install of xp sp3 as needed the admin password to gain access into the geovison software thankyou for your advice but it is looking like its a 12 port dvr card i didnt even know one existed

im on a 800v3 audio card v3.01 and ive got the usb sic card i can only go as high as 7.05 by the detect system geovision has as its got a better diagram to follow by for an upgrade to geovision cards i hope its not minded that i posted it here http://www.geovision.com.au/Downloads.htm the above link http://www.geovision.com.au/Downloads.htm but i can assure you i will mess to get it higher on another hard drive that i have

info system windows xp sp3 2 gig memory ddr2 conroe 1333 dvi/h mainboard on board graphics changing to pci express once geovision card up and running fully 500gb sata hard drive geovision dvr card pci 16 camera inputs + 4 audio inputs 800v3 audio the card has 650/750/800 v3.01 version installed 7.05 with usb key all drivers installed first before gv v7.05 installed on same hdrive but its only a test system first to get things going ive read the above but its not what im seeing ive got 1-12 cameras showing and working by removal of the camera and putting it on each link to test the signal is being received through the wire but 13-16 cameras not working or showing on the viewing panel been into the password setup and it shows cameras 1-12 with a tick in the boxes 13-16 are unticked i cant find no way of being able to get them working i could have a 12 camera pci instead of a 16 camera pci card but not sure it does have a 12 port s1 sticker thoe as its the first pc dvr that ive built up could you please advice